[Glass] Ubuntu 14.04 ethernet static ip and GemTools login

[Dario Trussardi via Glass]

Dale,

> Dario,
> 
> I am not a network configuration expert either ...
> 
> You don't mention whether or not you have shutdown the stone before adding the static ip...and restart after changing the ip address..
> 
> Once you've monkeyed with the network addresses, I would think that you need to restart the whole system.

Yes, after setup-change the file: 	interfaces	 i restart the system.

> 
> Give that a try (you might have to kill the stoned process to bring things down) and let me know if you are still seeing the problem.
> 

The problem is not resolved, and i don't have some idea about resolved it.

Ciao,

	Dario

> Dale
> 
> On 03/24/2015 09:09 AM, Dario Trussardi via Glass wrote:
>> Ciao,
>> 
>>  i'm not expert about ethernet configuration, and maybe I've got it all wrong.
>> 
>>  The system setup:
>> 
>>  I have a Ubuntu 14.04 -server where i run tODE 3.1.0.6 environment with Daemontools service.
>> 
>> 
>> Case A)
>>         With this /etc/network/interfaces  
>> 
>> #
>>               This file describes the network interfaces available on
>>               your system
>> #
>>               and how to activate them. For more information, see
>>               interfaces(5).
>> 
>>             
>> #
>>               The loopback network interface
>> auto
>>               lo
>> iface
>>               lo inet loopback
>> 
>>             
>> #
>>               The primary network interface
>> auto
>>               p2p1
>> iface
>>               p2p1 inet dhcp
>> 
>>  the GemTools login work fine.
>> 
>>  The gemstone_status  report:
>> 
>> Status   Version    Owner    Pid   Port   Started     Type       Name
>> ------- --------- --------- ----- ----- ------------ ------      ----
>>   OK    3.1.0.6   scandella  1441 53933 mar 24 16:04 Stone       gestionale
>>   OK    3.1.0.6   scandella  1443 47743 mar 24 16:04 cache       gestionale~9af495ccd1149d82
>>   OK    3.1.0.6   scandella  1478 50377 mar 24 16:04 Netldi      gs64ldi
>> 
>> [sudo] password for scandella: 
>> /etc/service/gs_maintenance: up (pid 667) 2971 seconds
>> /etc/service/gs_seaside-9060: up (pid 665) 2971 seconds
>> /etc/service/gs_seaside-9061: up (pid 671) 2971 seconds
>> /etc/service/gs_seaside-9062: up (pid 668) 2971 seconds
>> /etc/service/gs_seaside-9063: up (pid 672) 2971 seconds
>> /etc/service/gs_seaside-9064: up (pid 666) 2971 seconds
>> /etc/service/gs_seaside-9065: up (pid 669) 2971 seconds
>> /etc/service/gs_statmon-1: up (pid 1598) 2951 seconds
>> /etc/service/gs_statmon-60: up (pid 673) 2971 seconds
>> 
>> 
>> Case B)
>>           With this /etc/network/interfaces  ( i need to set a static ip )
>> 
>> #
>>                 This file describes the network interfaces available on
>>                 your system
>> #
>>                 and how to activate them. For more information, see
>>                 interfaces(5).
>> 
>>               
>> #
>>                 The loopback network interface
>> auto
>>                 lo
>> iface
>>                 lo inet loopback
>> 
>>               
>> #
>>                 The primary network interface
>> 
>>               
>> auto
>>                 p2p1
>> iface
>>                 p2p1 inet static
>> address
>>                 192.168.1.10
>> netmask
>>                 255.255.255.0
>> network
>>                 192.168.1.0
>> brodcast
>>                 192.168.1.255
>> gateway
>>                 192.168.1.254
>> 
>> 
>>           
>>  the GemTools login go into loop and i need to restart the GemTools image. 
>> 
>> 
>>  The gemstone_status
>>         after the first GemTools attempt  login report:
>> 
>>           
>> Status
>>               Version Owner Pid Port Started Type Name
>> -------
>>               --------- --------- ----- ----- ------------ ------ ----
>>  OK
>>               3.1.0.6 scandella 1441 53933 mar 24 16:04 Stone gestionale
>>  OK
>>               3.1.0.6 scandella 1443 47743 mar 24 16:04 cache
>>               gestionale~9af495ccd1149d82
>>  
>> ******* frozen  3.1.0.6
>>           scandella 1478 50377 mar 24 16:04 Netldi gs64ldi
>> 
>>             [sudo] password for scandella: /etc/service/gs_maintenance:
>>             up (pid 667) 2971 seconds
>>             /etc/service/gs_seaside-9060: up (pid 665) 2971 seconds
>>             /etc/service/gs_seaside-9061: up (pid 671) 2971 seconds
>>             /etc/service/gs_seaside-9062: up (pid 668) 2971 seconds
>>             /etc/service/gs_seaside-9063: up (pid 672) 2971 seconds
>>             /etc/service/gs_seaside-9064: up (pid 666) 2971 seconds
>>             /etc/service/gs_seaside-9065: up (pid 669) 2971 seconds
>>             /etc/service/gs_statmon-1: up (pid 1598) 2951 seconds
>>             /etc/service/gs_statmon-60: up (pid 673) 2971 seconds
>> 
>> 
>> Someone can help me out on how to configure the network card ( with a static address  IP ) so Gemtools works well?
>> 
>> Thanks,
>> 
>>  Dario
>> 
>> 
>> 
>> _______________________________________________
>> Glass mailing list
>> Glass at lists.gemtalksystems.com
>> http://lists.gemtalksystems.com/mailman/listinfo/glass
> 
> _______________________________________________
> Glass mailing list
> Glass at lists.gemtalksystems.com
> http://lists.gemtalksystems.com/mailman/listinfo/glass

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gemtalksystems.com/mailman/private/glass/attachments/20150324/35172bee/attachment.html>