[Glass] Ubuntu 14.04 ethernet static ip and GemTools login

Dario Trussardi via Glass glass at lists.gemtalksystems.com
Tue Mar 24 10:44:54 PDT 2015


Ciao,

	i note this when  the GemTools is into:	 login loop.

	If i stop the gemstone with the command:   ./gemstone_stop

	the GemTools open the dialog error:

	Error: Unable to create a GemStone session.
	Network partner has disconnected. For further information about login failures, check the gem log file.

	Dario

> Joachim,
> 
>> Dario,
>> 
>> You didn't mention if you can ssh to the machine. If so, I'd say it's very likely to be a gemstone problem...
> 
> 	Yes i can manage the ssh on the machine with static IP  without problem.
> 
> 	Thanks,
> 
> 		Dario
>> 
>> J.
>> 
>> 
>> 
>> Am 24.03.2015 um 17:37 schrieb Dario Trussardi via Glass <glass at lists.gemtalksystems.com>:
>> 
>>> 
>>> Dale,
>>> 
>>>> Dario,
>>>> 
>>>> I am not a network configuration expert either ...
>>>> 
>>>> You don't mention whether or not you have shutdown the stone before adding the static ip...and restart after changing the ip address..
>>>> 
>>>> Once you've monkeyed with the network addresses, I would think that you need to restart the whole system.
>>> 
>>> Yes, after setup-change the file: 	interfaces	 i restart the system.
>>> 
>>>> 
>>>> Give that a try (you might have to kill the stoned process to bring things down) and let me know if you are still seeing the problem.
>>>> 
>>> 
>>> The problem is not resolved, and i don't have some idea about resolved it.
>>> 
>>> Ciao,
>>> 
>>> 	Dario
>>> 
>>>> Dale
>>>> 
>>>> On 03/24/2015 09:09 AM, Dario Trussardi via Glass wrote:
>>>>> Ciao,
>>>>> 
>>>>>  i'm not expert about ethernet configuration, and maybe I've got it all wrong.
>>>>> 
>>>>>  The system setup:
>>>>> 
>>>>>  I have a Ubuntu 14.04 -server where i run tODE 3.1.0.6 environment with Daemontools service.
>>>>> 
>>>>> 
>>>>> Case A)
>>>>>         With this /etc/network/interfaces  
>>>>> 
>>>>> #
>>>>>               This file describes the network interfaces available on
>>>>>               your system
>>>>> #
>>>>>               and how to activate them. For more information, see
>>>>>               interfaces(5).
>>>>> 
>>>>>             
>>>>> #
>>>>>               The loopback network interface
>>>>> auto
>>>>>               lo
>>>>> iface
>>>>>               lo inet loopback
>>>>> 
>>>>>             
>>>>> #
>>>>>               The primary network interface
>>>>> auto
>>>>>               p2p1
>>>>> iface
>>>>>               p2p1 inet dhcp
>>>>> 
>>>>>  the GemTools login work fine.
>>>>> 
>>>>>  The gemstone_status  report:
>>>>> 
>>>>> Status   Version    Owner    Pid   Port   Started     Type       Name
>>>>> ------- --------- --------- ----- ----- ------------ ------      ----
>>>>>   OK    3.1.0.6   scandella  1441 53933 mar 24 16:04 Stone       gestionale
>>>>>   OK    3.1.0.6   scandella  1443 47743 mar 24 16:04 cache       gestionale~9af495ccd1149d82
>>>>>   OK    3.1.0.6   scandella  1478 50377 mar 24 16:04 Netldi      gs64ldi
>>>>> 
>>>>> [sudo] password for scandella: 
>>>>> /etc/service/gs_maintenance: up (pid 667) 2971 seconds
>>>>> /etc/service/gs_seaside-9060: up (pid 665) 2971 seconds
>>>>> /etc/service/gs_seaside-9061: up (pid 671) 2971 seconds
>>>>> /etc/service/gs_seaside-9062: up (pid 668) 2971 seconds
>>>>> /etc/service/gs_seaside-9063: up (pid 672) 2971 seconds
>>>>> /etc/service/gs_seaside-9064: up (pid 666) 2971 seconds
>>>>> /etc/service/gs_seaside-9065: up (pid 669) 2971 seconds
>>>>> /etc/service/gs_statmon-1: up (pid 1598) 2951 seconds
>>>>> /etc/service/gs_statmon-60: up (pid 673) 2971 seconds
>>>>> 
>>>>> 
>>>>> Case B)
>>>>>           With this /etc/network/interfaces  ( i need to set a static ip )
>>>>> 
>>>>> #
>>>>>                 This file describes the network interfaces available on
>>>>>                 your system
>>>>> #
>>>>>                 and how to activate them. For more information, see
>>>>>                 interfaces(5).
>>>>> 
>>>>>               
>>>>> #
>>>>>                 The loopback network interface
>>>>> auto
>>>>>                 lo
>>>>> iface
>>>>>                 lo inet loopback
>>>>> 
>>>>>               
>>>>> #
>>>>>                 The primary network interface
>>>>> 
>>>>>               
>>>>> auto
>>>>>                 p2p1
>>>>> iface
>>>>>                 p2p1 inet static
>>>>> address
>>>>>                 192.168.1.10
>>>>> netmask
>>>>>                 255.255.255.0
>>>>> network
>>>>>                 192.168.1.0
>>>>> brodcast
>>>>>                 192.168.1.255
>>>>> gateway
>>>>>                 192.168.1.254
>>>>> 
>>>>> 
>>>>>           
>>>>>  the GemTools login go into loop and i need to restart the GemTools image. 
>>>>> 
>>>>> 
>>>>>  The gemstone_status
>>>>>         after the first GemTools attempt  login report:
>>>>> 
>>>>>           
>>>>> Status
>>>>>               Version Owner Pid Port Started Type Name
>>>>> -------
>>>>>               --------- --------- ----- ----- ------------ ------ ----
>>>>>  OK
>>>>>               3.1.0.6 scandella 1441 53933 mar 24 16:04 Stone gestionale
>>>>>  OK
>>>>>               3.1.0.6 scandella 1443 47743 mar 24 16:04 cache
>>>>>               gestionale~9af495ccd1149d82
>>>>>  
>>>>> ******* frozen  3.1.0.6
>>>>>           scandella 1478 50377 mar 24 16:04 Netldi gs64ldi
>>>>> 
>>>>>             [sudo] password for scandella: /etc/service/gs_maintenance:
>>>>>             up (pid 667) 2971 seconds
>>>>>             /etc/service/gs_seaside-9060: up (pid 665) 2971 seconds
>>>>>             /etc/service/gs_seaside-9061: up (pid 671) 2971 seconds
>>>>>             /etc/service/gs_seaside-9062: up (pid 668) 2971 seconds
>>>>>             /etc/service/gs_seaside-9063: up (pid 672) 2971 seconds
>>>>>             /etc/service/gs_seaside-9064: up (pid 666) 2971 seconds
>>>>>             /etc/service/gs_seaside-9065: up (pid 669) 2971 seconds
>>>>>             /etc/service/gs_statmon-1: up (pid 1598) 2951 seconds
>>>>>             /etc/service/gs_statmon-60: up (pid 673) 2971 seconds
>>>>> 
>>>>> 
>>>>> Someone can help me out on how to configure the network card ( with a static address  IP ) so Gemtools works well?
>>>>> 
>>>>> Thanks,
>>>>> 
>>>>>  Dario
>>>>> 
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> Glass mailing list
>>>>> Glass at lists.gemtalksystems.com
>>>>> http://lists.gemtalksystems.com/mailman/listinfo/glass
>>>> 
>>>> _______________________________________________
>>>> Glass mailing list
>>>> Glass at lists.gemtalksystems.com
>>>> http://lists.gemtalksystems.com/mailman/listinfo/glass
>>> 
>>> _______________________________________________
>>> Glass mailing list
>>> Glass at lists.gemtalksystems.com
>>> http://lists.gemtalksystems.com/mailman/listinfo/glass
> 
> _______________________________________________
> Glass mailing list
> Glass at lists.gemtalksystems.com
> http://lists.gemtalksystems.com/mailman/listinfo/glass

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gemtalksystems.com/mailman/private/glass/attachments/20150324/8f660ba1/attachment-0001.html>


More information about the Glass mailing list