[Glass] Seaside - Installation - (1) problem with gemServer.ston script; (2) attaching via localhost
Ricardo Correa via Glass
glass at lists.gemtalksystems.com
Fri May 19 04:14:28 PDT 2017
Hi all,
I ran into those NetLDI issues recently, the fix was to add my hostname to the /etc/hosts file (next to localhost).
Best,
Ricardo
On 19 May 2017, 05:42 +0200, Dale Henrichs via Glass <glass at lists.gemtalksystems.com>, wrote:
>
>
> On 5/18/17 5:14 PM, Reg Krock wrote:
> > This continues to be frustrating. Do you know if there is anything special that needs to be done on OS/X?
> Up until now, I didn't know you were on a mac. When Sierra was first released there were issues with running a stone[1]. Those issues were resolved with the release of 10.2.2[2]. Since then Johan reported some issues with getting the hostname set up correctly for Sierra[3]. James had some issues with running GemStone on Sierra, but I don't have an email trail for his issue -- I'll ask him to see if he remembers what the problem was and what he did to fix or work around it ... Other than James, it seems that there are a number of people using GsDevKit_home and Seaside without hitting the type of problem you are reporting, but then you are using a relatively recent version of Sierra and I don't know (yet) if your issue is related to the new version or something else.
>
> I'm running on OS/X 10.10.5 ... at home ... up until now and I've been testing against linux .. at work. When Sierra first came out it didn't support the VPN client that I use and then there were the basic problems with GemStone and then there were the issues with running stones at all, so I've been a bit gun shy about updating ...
>
> [1] http://forum.world.st/GS3-3-0-and-macOS-Sierra-100-CPU-td4918469.html
> [2] http://forum.world.st/MacOS-Sierra-support-td4928733.html
> [3] http://forum.world.st/SmalltalkCI-gemstone-on-mac-os-sierra-td4939640.html#a4939669
>
> > I am running both code client and gemstone server on my MacBook (OS/X 10.12.4) and I have answered ‘Allow’ to ‘’stoned’’ and “netldi” accepting incoming network connections.
> >
> > What I did today was to rename my GsDevKit_home to GsDevKit_home_old and then I have three reinstalled 3.3.5 from scratching using port 1750. All to no avail.
> Okay ... I'm building a Seaside stone on my own laptop so that I've got something to compare with ....
> > However I did not have any problems with gemServer.ston script. That problem went away.
> Okay ... I'll guess that I've got an issue with on the dev branch of tODE ...
> >
> > The two files below are: (1) the installation steps including ‘project load’ prints and inspector prints of the seaside server and WADisplatcher; (2) the transcript.
> I notice in the installation steps that you explicitly installed GsApplicationTools (step 13) --- it shouldn't make a difference because Seaside itself should install GsApplicationTools --- I'm just curious why you felt it necessary to do that step, since it isn't listed in the Seaside steps that I've recommended that you use[1] ...
>
> [1] https://github.com/GsDevKit/GsDevKit_home/blob/master/docs/gettingStartedWithSeaside.md
> >
> >
> >
> >
> >
> >
> >
> > All attempts to connect from the Web Browser to the seaside gem failed.
> >
> > I then took a Pharo 5.0 image, loaded in seaside and started seaside. I was able to connect.
> Did you use port 1750 for the seaside port in Pharo5.0?
> >
> > I have also attached copies of all of the logs in case they are useful.
> >
> >
> I'm suspicious that the seaside gems aren't properly starting ... and concerned that the you didn't get any error feedback (if indeed the gems didn't start properly)... My first clue is in your transcript. At the very end your transcript looks like the following
>
>
> transcript '---Finished backup to 18/05/2017 16:22:35 -- seas... 95534 05/18/2017 16:22:36:469
> transcript 'scriptLogEvent: ''performOnServer: seaside :: $GS... 95534 05/18/2017 16:23:20:291
> transcript 'scriptLogEvent: ''performOnServer: SeasideMainten... 95534 05/18/2017 16:23:20:371
> and when I ran the /home/seaside/gemServer script I got the following entries:
>
> transcript '---Finished backup to 17/05/2017 15:55:19 -- seas... 30803 05/17/2017 15:55:21:314
> transcript 'scriptLogEvent: ''performOnServer: seaside :: $GS... 30803 05/17/2017 15:55:47:562
> transcript 'scriptLogEvent: ''performOnServer: SeasideMainten... 30803 05/17/2017 15:55:47:655
> transcript 'scriptLogEvent: ''-->>Script Start seaside on 175... 32375 05/17/2017 15:55:47:686
> transcript 'scriptLogEvent: ''recordGemPid: seaside on 1750''... 32375 05/17/2017 15:55:47:686
> transcript 'scriptLogEvent: ''setStatmonCacheName: seaside''' 32375 05/17/2017 15:55:47:688
> transcript 'scriptLogEvent: ''enableRemoteBreakpointHandling:... 32375 05/17/2017 15:55:47:689
> transcript 'scriptLogEvent: ''-->>Script Start SeasideMainten... 32385 05/17/2017 15:55:47:696
> transcript 'scriptLogEvent: ''recordGemPid: SeasideMaintenanc... 32385 05/17/2017 15:55:47:700
> transcript 'scriptLogEvent: ''setStatmonCacheName: SeasideMai... 32385 05/17/2017 15:55:47:704
> transcript 'scriptLogEvent: ''enableRemoteBreakpointHandling:... 32385 05/17/2017 15:55:47:704
>
> This implies that there is something fishy going on ... and sure enough, when I look at your seaside_server-1750.log file, the login is failing:
>
> GemStone: Error Fatal
> Unable to create a session, check netldi and gem log files.
> NetLDI service 'gs64ldi' not found on node 'localhost6' port 50377 :
> connect(11,::ffff:127.0.0.1,port=50377) failed with errno=22,EINVAL, Invalid argument (programmer error)
> Error Category: 231169 [GemStone] Number: 4042 Arg Count: 0 Context : 20 exception : 20
>
> Login failed due to errors.
> topaz > exec iferr 1 : stack
> STACK can't be used prior to logging in.
> topaz> iferror stack
> topaz>
> topaz> login
> -----------------------------------------------------
>
> The maintenance vm is having a similar problem:
>
> topaz> login
> -----------------------------------------------------
> GemStone: Error Fatal
> Unable to create a session, check netldi and gem log files.
> NetLDI service 'gs64ldi' not found on node 'localhost6' port 50377 :
> connect(11,::ffff:127.0.0.1,port=50377) failed with errno=22,EINVAL, Invalid argument (programmer error)
> Error Category: 231169 [GemStone] Number: 4042 Arg Count: 0 Context : 20 exception : 20
>
> Sooo for some reason the gemserver script is not failing when the gem fails to start, so that looks like a bug in the gem server starting code and/or tode script ...
>
> I've compared the post-Seaside load `project list` and other than the fact that your listing of the short SHA does not exactly match the short SHA that I see in my list, we have loaded and are using exactly the same code .... so thank you for rebuilding the system and providing me with the additional details, so I can confirm that we're on the same page and eliminate those variables ...
>
> Well my build just finished and of course the servers start just fine for me ...
>
> You are obviously able to connect to the netldi, since you are using tODE ...
>
> Looking closer at the seaside_server-1750.log note that topaz is processing the $HOME/.topazini file which also appears to be doing a login ...
> ================
> Reading initialization file /Users/regkrock/.topazini
> topaz> set gemstone gs64stone
> topaz> set gemnetid gemnetobject
> topaz> set username DataCurator
> topaz> set password swordfish
> topaz> lo
> [Info]: libssl-3.3.5-64.dylib: loaded
> -----------------------------------------------------
> GemStone: Error Fatal
> Unable to create a session, check netldi and gem log files.
> NetLDI service 'gs64ldi' not found on node 'localhost6' port 50377 :
> connect(14,::ffff:127.0.0.1,port=50377) failed with errno=22,EINVAL, Invalid argument (programmer error)
> Error Category: [GemStone] Number: 4042 Arg Count: 0
>
> Login failed due to errors.
> End of initialization files
> topaz>
> topaz> set user DataCurator pass swordfish gems devKit_33
> Warning: clearing the previous GemStone password.
> topaz>
> topaz> display oops
> topaz> iferror stack
> topaz>
> topaz> login
> -----------------------------------------------------
> GemStone: Error Fatal
> Unable to create a session, check netldi and gem log files.
> NetLDI service 'gs64ldi' not found on node 'localhost6' port 50377 :
> connect(11,::ffff:127.0.0.1,port=50377) failed with errno=22,EINVAL, Invalid argument (programmer error)
> Error Category: 231169 [GemStone] Number: 4042 Arg Count: 0 Context : 20 exception : 20
> ==========================
>
> Now, I've created a similar .topazini file in my $HOME and I get the same login failure:
>
> ==========================
> Reading initialization file /Users/dhenrich/.topazini
> topaz> SET GEMSTONE gss_344
> topaz> set gemnetid gemnetobject
> topaz> set user DataCurator
> topaz> set password swordfish
> topaz> login
> [Info]: libssl-3.3.5-64.dylib: loaded
> -----------------------------------------------------
> GemStone: Error Fatal
> Unable to create a session, check netldi and gem log files.
> NetLDI service 'gs64ldi' not found on node 'localhost6' port 50377 :
> connect(14,::ffff:127.0.0.1,port=50377) failed with errno=22,EINVAL, Invalid argument (programmer error)
> Error Category: [GemStone] Number: 4042 Arg Count: 0
>
> Login failed due to errors.
> topaz>
> End of initialization files
> topaz>
> topaz> set user DataCurator pass swordfish gems reg_335
> Warning: clearing the previous GemStone password.
> topaz>
> topaz> display oops
> topaz> iferror stack
> topaz>
> topaz> login
> -----------------------------------------------------
> GemStone: Error Fatal
> Unable to create a session, check netldi and gem log files.
> NetLDI service 'gs64ldi' not found on node 'localhost6' port 50377 :
> connect(11,::ffff:127.0.0.1,port=50377) failed with errno=22,EINVAL, Invalid argument (programmer error)
> Error Category: 231169 [GemStone] Number: 4042 Arg Count: 0 Context : 20 exception : 20
> ==========================
>
> Sooooo, it's the .topazini file in your home directory that is the culprit ... if you remove that file, the scripts should start the gemservers properly ...
>
> I've submitted a bug on this[4] and I consider it a bug that the gemserver script was not exiting with an error message ...
>
> Hopefully things will start to go a bit smoother for you ...
>
> Dale
>
> [4] https://github.com/GsDevKit/GsDevKit_home/issues/175
> _______________________________________________
> Glass mailing list
> Glass at lists.gemtalksystems.com
> http://lists.gemtalksystems.com/mailman/listinfo/glass
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gemtalksystems.com/mailman/private/glass/attachments/20170519/d6292de1/attachment-0001.html>
More information about the Glass
mailing list