[Glass] Failing to load Seaside using tODE
Ezequiel R. Aguerre
ezeaguerre at gmail.com
Thu Jan 13 07:21:08 PST 2022
Oh ok! great! I'm glad to be helpful :-)
And thank you very much for helping me with the issue! :-)
Just let me know if you need anything else from my side.
Best!
El mié., 12 ene. 2022 21:44, Dale Henrichs <dale.henrichs at gemtalksystems.com>
escribió:
> am I sure ? ...
>
>
> No I am not sure what the behavior should be in the presence of locales
> (obviously) ... however, I do recognize a bug when I see one so we'll start
> investigating tomorrow ... thanks for your help uncovering this puppy ...
>
> Dale
>
> On Wed, Jan 12, 2022 at 1:52 PM Ezequiel R. Aguerre <ezeaguerre at gmail.com>
> wrote:
>
>> Dale,
>>
>> Ok, I wasn't expecting that. Are you sure that's the proper behavior?
>> Because I wouldn't like my code to break on a different locale (like
>> what happened to Grease on my computer).
>>
>> Here:
>> https://downloads.gemtalksystems.com/docs/GemStone64/3.6.x/GS64-ProgGuide-3.6/6-Numerics.htm#pgfId-471167
>> in the section "Internationalizating Decimal Points using Locale" it says:
>>
>> > Note that Smalltalk syntax requires the use of “.” as the decimal
>> point separator, so expressions involving literal floating point numbers
>> within Smalltalk code will still require use of the period, regardless of
>> Locale.
>>
>> I understand that the code should always use a dot (.) as the decimal
>> separator. Maybe it's different with the ScaledDecimal, I don't know.
>>
>> Anyway, here are the results of evaluating different expression in the
>> workspace:
>>
>> Locale decimalPoint "=> ','"
>> Number readFrom: '1.23'. "=> 1"
>> Number readFrom: '1,23'. "=> 1,23"
>> Number readFrom: '1.23s5'. "=> 1"
>> Number readFrom: '1,23s5". "=> error"
>> ScaledDecimal fromString: '1.23s5'. "=> error"
>> ScaledDecimal fromString: '1,23s5'. "=> 1,23000"
>>
>> If I inspect the decimal point I get this:
>>
>> Inspect ','/
>> --------------------
>> . -> ','
>> (class)@ -> String
>> (oop)@ -> 62435585
>> (committed)@ -> true
>> (size)@ -> 1
>> (bytes)@ -> #[ 44]
>> (utf8)@ -> #[ 44]
>> 1@ -> $,
>>
>> So it's a regular comma.
>>
>> And the following two expressions, when evaluated at the workspace, fail:
>>
>> 1.23s4
>> 1,23s4
>>
>> The first one (using a dot as a decimal separator), gives the following
>> stack trace:
>>
>> a CompileError occurred (error 1001), illegal exponent
>> --------------------
>> 1. CompileError(AbstractException)>>_outer:with: @9 line 20
>> 2. CompileError(AbstractException)>>outer @2 line 19
>> 3. [] in UndefinedObject(TDAbstractEnvironment)>>_compileBlock: @36 line
>> 11
>> 4. Array(Collection)>>do: @5 line 10
>> 5. [] in TDStandardEnvironment(TDAbstractEnvironment)>>_compileBlock: @14
>> line 8
>> 6. CompileError(AbstractException)>>_executeHandler: @7 line 11
>> 7. CompileError(AbstractException)>>_signalFromPrimitive: @1 line 8
>> 8. String>>_compileInContext:symbolList:oldLitVars:environmentId:flags:
>> @1 line 21
>> 9. [] in
>> UndefinedObject(TDAbstractEnvironment)>>_compile:inContext:literalVars:tempSymbolList:environmentId:
>> @7 line 5
>> 10. [] in TDStandardEnvironment(TDAbstractEnvironment)>>_compileBlock: @8
>> line 2
>> 11. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>> 12. TDStandardEnvironment(TDAbstractEnvironment)>>_compileBlock: @3 line 3
>> 13.
>> TDStandardEnvironment(TDAbstractEnvironment)>>_compile:inContext:literalVars:tempSymbolList:environmentId:
>> @2 line 3
>> 14.
>> TDStandardEnvironment(TDAbstractEnvironment)>>compile:inContext:literalVars:tempSymbolList:
>> @3 line 3
>> 15.
>> TDStandardEnvironment(TDAbstractEnvironment)>>evaluate:in:literalVars:tempSymbolList:
>> @2 line 3
>> 16.
>> TDTopezServer>>evaluateString:inContext:literalVars:withTempSymbolList: @4
>> line 5
>> 17. TDTopezServer>>evaluateString:inContext:literalVars: @3 line 3
>> 18.
>> TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>evaluateString:topez:
>> @4 line 3
>> 19.
>> TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>printItMenuAction:selectedText:
>> @3 line 3
>> 20. TDWorkspaceClientElementBuilder(Object)>>perform:with:with: @1 line 9
>> 21.
>> TDWorkspaceClientElementBuilder(TDWindowBuilder)>>handleMenuActions:listElement:actionArg:
>> @12 line 10
>> 22. [] in
>> TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>menuActionBlock
>> @9 line 8
>> 23. ExecBlock>>valueWithArguments: @1 line 7
>> 24. ExecBlock>>value:value:value:value:value: @2 line 11
>> 25. GsNMethod class>>_gsReturnToC @1 line 11
>>
>> And the second one (using the comma as decimal separator), gives this
>> stack trace:
>>
>> a MessageNotUnderstood occurred (error 2010), a SmallInteger does not
>> understand #','
>> --------------------
>> 1. MessageNotUnderstood>>defaultAction @2 line 3
>> 2. MessageNotUnderstood(AbstractException)>>_signalWith: @5 line 25
>> 3. MessageNotUnderstood(AbstractException)>>signal @2 line 47
>> 4. SmallInteger(Object)>>doesNotUnderstand: @9 line 10
>> 5. SmallInteger(Object)>>_doesNotUnderstand:args:envId:reason: @8 line 14
>> 6. Executed Code
>> 7. GsNMethod>>_executeInContext: @1 line 9
>> 8.
>> TDStandardEnvironment(TDAbstractEnvironment)>>evaluate:in:literalVars:tempSymbolList:
>> @3 line 6
>> 9.
>> TDTopezServer>>evaluateString:inContext:literalVars:withTempSymbolList: @4
>> line 5
>> 10. TDTopezServer>>evaluateString:inContext:literalVars: @3 line 3
>> 11.
>> TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>evaluateString:topez:
>> @4 line 3
>> 12.
>> TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>printItMenuAction:selectedText:
>> @3 line 3
>> 13. TDWorkspaceClientElementBuilder(Object)>>perform:with:with: @1 line 9
>> 14.
>> TDWorkspaceClientElementBuilder(TDWindowBuilder)>>handleMenuActions:listElement:actionArg:
>> @12 line 10
>> 15. [] in
>> TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>menuActionBlock
>> @9 line 8
>> 16. ExecBlock>>valueWithArguments: @1 line 7
>> 17. ExecBlock>>value:value:value:value:value: @2 line 11
>> 18. GsNMethod class>>_gsReturnToC @1 line 11
>>
>> I also tried to compile a method with a literal expression using a comma
>> and it fails in the same way (this last one, tries to send "," as a message
>> to the SmallInteger).
>>
>> I hope that helps.
>>
>> Cheers
>> --
>> Ezequiel R. Aguerre
>>
>>
>> El mié, 12 ene 2022 a la(s) 14:31, Dale Henrichs (
>> dale.henrichs at gemtalksystems.com) escribió:
>>
>>> Ezequiel,
>>>
>>> I think I misled you a bit with my `We can't rule out a locale bug...`
>>> comment .... It is a feature to use the locale specific punctuation. So the
>>> compile error was expected behavior, not a bug.
>>>
>>> I was referring your `tried yesterday to compile the expression in the
>>> workspace using a comma and it didn't work` statement ... since it seems
>>> that using the locale specific decimal separator didn't work as expected,
>>> when it should have?
>>>
>>> If you you're interested you could try the 1,21s3 experiment again and
>>> send us a stack if it fails, we could look into fixing this bug in a future
>>> release ...
>>>
>>> Dale
>>>
>>> On Wed, Jan 12, 2022 at 6:47 AM Ezequiel R. Aguerre <
>>> ezeaguerre at gmail.com> wrote:
>>>
>>>> Well, I can confirm that it was a locale issue. I changed the locale to
>>>> "C" and was able to install, load and run Seaside.
>>>>
>>>> I did the following:
>>>>
>>>> export LANG=C
>>>> export LC_ALL=C
>>>> startAllStones
>>>> startNetldi devKit_363
>>>> startClient tode1
>>>>
>>>> And now everything works! :-)
>>>>
>>>> So, I guess the compiler is changing it's behavior based on the locale,
>>>> which I suppose is a bug. Or at least, I didn't expect that.
>>>>
>>>> Thank you very much! to both of you! Now I can start experimenting with
>>>> Gemstone!
>>>>
>>>> Cheers
>>>>
>>>> --
>>>> Ezequiel R. Aguerre
>>>>
>>>>
>>>> El mar, 11 ene 2022 a la(s) 15:43, Dale Henrichs (
>>>> dale.henrichs at gemtalksystems.com) escribió:
>>>>
>>>>> Ezequiel,
>>>>>
>>>>> We can't rule out a locale bug in GemStone, but we'll see ...
>>>>>
>>>>> Dale
>>>>>
>>>>> On Tue, Jan 11, 2022 at 10:33 AM Ezequiel R. Aguerre <
>>>>> ezeaguerre at gmail.com> wrote:
>>>>>
>>>>>> Hi!
>>>>>>
>>>>>> I've already tried yesterday to compile the expression in the
>>>>>> workspace using a comma and it didn't work. But indeed, we use the comma as
>>>>>> a decimal separator in Spanish. I'm at work now, but when I get back home
>>>>>> I'll try again using the English locale and I'll run all the processes
>>>>>> under that configuration.
>>>>>>
>>>>>> If that doesn't work, then I'll upload the extent and the topaz
>>>>>> banner.
>>>>>>
>>>>>> Thank you very much for your help! To both of you :-)
>>>>>>
>>>>>> --
>>>>>> Ezequiel R. Aguerre
>>>>>>
>>>>>>
>>>>>> El mar, 11 ene 2022 a la(s) 15:15, Dale Henrichs (
>>>>>> dale.henrichs at gemtalksystems.com) escribió:
>>>>>>
>>>>>>> Ezequiel,
>>>>>>>
>>>>>>> I think Johan has hit the nail on the head ... this very much looks
>>>>>>> like a locale issue... Thanks, Johan!
>>>>>>>
>>>>>>> Dale
>>>>>>>
>>>>>>> On Tue, Jan 11, 2022 at 10:13 AM Dale Henrichs <
>>>>>>> dale.henrichs at gemtalksystems.com> wrote:
>>>>>>>
>>>>>>>> Ezequiel,
>>>>>>>>
>>>>>>>> Thanks for the detailed info ... we would like to also see the
>>>>>>>> banner from a topaz run (startTopaz <stone-name> -l) ... just copy all of
>>>>>>>> the output into a file and send to us.
>>>>>>>>
>>>>>>>> We are figuring that the quickest way to understand the problem is
>>>>>>>> to get our hands on your extent. Log into
>>>>>>>> https://downloads.gemtalksystems.com/ using the username anonymous
>>>>>>>> with any password to upload your extent ...
>>>>>>>>
>>>>>>>> Before copying the extent from
>>>>>>>> $GS_HOME/server/stones/<stone-name>/extents/extent0.dbf , shut down the
>>>>>>>> stone ... you can zip the extent if you want to make upload quicker...
>>>>>>>>
>>>>>>>> This way we'll be able to set breakpoints in the compiler and
>>>>>>>> understand what might be happening ...
>>>>>>>>
>>>>>>>> Dale
>>>>>>>>
>>>>>>>> On Mon, Jan 10, 2022 at 8:31 PM Ezequiel R. Aguerre <
>>>>>>>> ezeaguerre at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Dale,
>>>>>>>>>
>>>>>>>>> Thank you very much.
>>>>>>>>>
>>>>>>>>> These are the projects on pristine system:
>>>>>>>>>
>>>>>>>>> aTDMetacelloProjectBrowser
>>>>>>>>> --------------------
>>>>>>>>> + GsDevKit_home e3b4149 [master] $GS_HOME
>>>>>>>>> |FileTree| 28ab532 [gemstone2.4]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/filetree/repository
>>>>>>>>> |GLASS1| b3209f2d [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/glass/repository
>>>>>>>>> Gofer 1.0.5.4 [release]
>>>>>>>>> http://seaside.gemtalksystems.com/ss/metacello
>>>>>>>>> |Grease| eef515d [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/Grease/repository
>>>>>>>>> |Metacello| e3963155 [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/metacello-work/repository
>>>>>>>>> |RB| 00d0408 [dev]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/rb/repository
>>>>>>>>> |Ston| daadc02 [gemstone]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/ston/repository
>>>>>>>>> |Tode| 60a33e11c [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/tode/repository
>>>>>>>>> |ZincHTTPComponents| 2c834394 [gs_master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/zinc/repository
>>>>>>>>> |Zodiac| 0cf6770 [gs_master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/zodiac/repository
>>>>>>>>> |PharoCompatibility|
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/PharoCompatibility/repository
>>>>>>>>> |SmalltalkCI|
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/smalltalkCI/repository
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> After installing Seaside 3.2 with the following command:
>>>>>>>>>
>>>>>>>>> project install --url=
>>>>>>>>> http://gsdevkit.github.io/GsDevKit_home/Seaside32.ston
>>>>>>>>>
>>>>>>>>> The projects are:
>>>>>>>>>
>>>>>>>>> aTDMetacelloProjectBrowser
>>>>>>>>> --------------------
>>>>>>>>> + GsDevKit_home e3b4149 [master] $GS_HOME
>>>>>>>>> |FileTree| 28ab532 [gemstone2.4]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/filetree/repository
>>>>>>>>> |GLASS1| b3209f2d [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/glass/repository
>>>>>>>>> Gofer 1.0.5.4 [release]
>>>>>>>>> http://seaside.gemtalksystems.com/ss/metacello
>>>>>>>>> |Grease| eef515d [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/Grease/repository
>>>>>>>>> |Metacello| e3963155 [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/metacello-work/repository
>>>>>>>>> |RB| 00d0408 [dev]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/rb/repository
>>>>>>>>> |Ston| daadc02 [gemstone]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/ston/repository
>>>>>>>>> |Tode| 60a33e11c [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/tode/repository
>>>>>>>>> |ZincHTTPComponents| 2c834394 [gs_master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/zinc/repository
>>>>>>>>> |Zodiac| 0cf6770 [gs_master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/zodiac/repository
>>>>>>>>> |GsApplicationTools|
>>>>>>>>> filetree://$GS_HOME/shared/repos/gsApplicationTools/repository
>>>>>>>>> |PharoCompatibility|
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/PharoCompatibility/repository
>>>>>>>>> |Seaside3|
>>>>>>>>> filetree://$GS_HOME/shared/repos/Seaside/repository
>>>>>>>>> |SmalltalkCI|
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/smalltalkCI/repository
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> After trying to load Seaside with the following command:
>>>>>>>>>
>>>>>>>>> project load --loads=`#('Welcome' 'Development' 'Zinc Project'
>>>>>>>>> 'Examples')` Seaside3
>>>>>>>>>
>>>>>>>>> The projects are:
>>>>>>>>>
>>>>>>>>> aTDMetacelloProjectBrowser
>>>>>>>>> --------------------
>>>>>>>>> |* Grease| eef515d [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/Grease/repository
>>>>>>>>> + GsDevKit_home e3b4149 [master] $GS_HOME
>>>>>>>>> |FileTree| 28ab532 [gemstone2.4]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/filetree/repository
>>>>>>>>> |GLASS1| b3209f2d [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/glass/repository
>>>>>>>>> Gofer 1.0.5.4 [release]
>>>>>>>>> http://seaside.gemtalksystems.com/ss/metacello
>>>>>>>>> |GsApplicationTools| bb98f48 [master]
>>>>>>>>> filetree://$GS_HOME/shared/repos/gsApplicationTools/repository
>>>>>>>>> |Metacello| e3963155 [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/metacello-work/repository
>>>>>>>>> |RB| 00d0408 [dev]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/rb/repository
>>>>>>>>> |Ston| daadc02 [gemstone]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/ston/repository
>>>>>>>>> |Tode| 60a33e11c [master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/tode/repository
>>>>>>>>> |ZincHTTPComponents| 2c834394 [gs_master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/zinc/repository
>>>>>>>>> |Zodiac| 0cf6770 [gs_master]
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/zodiac/repository
>>>>>>>>> |PharoCompatibility|
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/PharoCompatibility/repository
>>>>>>>>> |Seaside3|
>>>>>>>>> filetree://$GS_HOME/shared/repos/Seaside/repository
>>>>>>>>> |SmalltalkCI|
>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/smalltalkCI/repository
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> The stack trace of the failed command is:
>>>>>>>>>
>>>>>>>>> UserDefinedError: Compile error in Class: #'GRPlatformTest'
>>>>>>>>> method: testGreaseString
>>>>>>>>> self assert: 'Timberwolf' greaseString...
>>>>>>>>> --------------------
>>>>>>>>> 1. UserDefinedError(AbstractException)>>_signalWith: @5 line 25
>>>>>>>>> 2. UserDefinedError(AbstractException)>>signal @2 line 47
>>>>>>>>> 3. GRPlatformTest class(Object)>>error: @6 line 7
>>>>>>>>> 4. GRPlatformTest class(Behavior)>>compileMethod:category: @9 line
>>>>>>>>> 16
>>>>>>>>> 5. MCPlatformSupport class>>compile:source:classified:withStamp:
>>>>>>>>> @4 line 5
>>>>>>>>> 6. MCMethodDefinition>>load @3 line 3
>>>>>>>>> 7. MCMethodDefinition(MCDefinition)>>loadOver: @2 line 2
>>>>>>>>> 8. [] in MCPackageLoader>>basicLoad @66 line 18
>>>>>>>>> 9. MessageNotUnderstood(AbstractException)>>_executeHandler: @7
>>>>>>>>> line 11
>>>>>>>>> 10. MessageNotUnderstood(AbstractException)>>_signalWith: @1 line 2
>>>>>>>>> 11. MessageNotUnderstood(AbstractException)>>signal @2 line 47
>>>>>>>>> 12. MCMethodDefinition(Object)>>doesNotUnderstand: @9 line 10
>>>>>>>>> 13.
>>>>>>>>> MCMethodDefinition(Object)>>_doesNotUnderstand:args:envId:reason: @8 line 14
>>>>>>>>> 14. [] in MCPackageLoader>>basicLoad @61 line 14
>>>>>>>>> 15. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>> 16. [] in UndefinedObject(MCPackageLoader)>>basicLoad @56 line 15
>>>>>>>>> 17. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>> 18. [] in UndefinedObject(MCPackageLoader)>>basicLoad @52 line 19
>>>>>>>>> 19. OrderedCollection(Collection)>>do: @5 line 10
>>>>>>>>> 20. OrderedCollection(Collection)>>do:displayingProgress: @2 line 3
>>>>>>>>> 21. [] in MCPackageLoader>>basicLoad @24 line 13
>>>>>>>>> 22. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>> 23. [] in MCPackageLoader>>basicLoad @15 line 49
>>>>>>>>> 24. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>> 25. MCPackageLoader>>basicLoad @11 line 51
>>>>>>>>> 26. [] in MCPackageLoader>>loadWithNameLike: @12 line 4
>>>>>>>>> 27. [] in
>>>>>>>>> UndefinedObject(MCPackageLoader)>>useChangeSetNamed:during: @13 line 9
>>>>>>>>> 28. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>> 29. MCPackageLoader>>useChangeSetNamed:during: @9 line 9
>>>>>>>>> 30. MCPackageLoader>>useNewChangeSetNamedLike:during: @3 line 2
>>>>>>>>> 31. MCPackageLoader>>loadWithNameLike: @6 line 4
>>>>>>>>> 32. MCVersionLoader>>load @9 line 6
>>>>>>>>> 33. MetacelloGoferLoad(GoferLoad)>>execute @6 line 3
>>>>>>>>> 34. [] in
>>>>>>>>> UndefinedObject(MetacelloCommonMCSpecLoader)>>loadPackageDirective:gofer:
>>>>>>>>> @46 line 17
>>>>>>>>> 35. [] in
>>>>>>>>> MetacelloLoadingMCSpecLoader(MetacelloCommonMCSpecLoader)>>loadPackageDirective:gofer:
>>>>>>>>> @23 line 21
>>>>>>>>> 36. MetacelloGemStonePlatform(MetacelloPlatform)>>do:displaying:
>>>>>>>>> @2 line 3
>>>>>>>>> 37.
>>>>>>>>> MetacelloLoadingMCSpecLoader(MetacelloCommonMCSpecLoader)>>loadPackageDirective:gofer:
>>>>>>>>> @7 line 5
>>>>>>>>> 38.
>>>>>>>>> MetacelloLinearLoadDirective(MetacelloVersionLoadDirective)>>loadPackageDirective:gofer:
>>>>>>>>> @4 line 4
>>>>>>>>> 39. MetacelloPackageLoadDirective>>loadUsing:gofer: @2 line 3
>>>>>>>>> 40. [] in
>>>>>>>>> UndefinedObject(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>> @8 line 3
>>>>>>>>> 41. OrderedCollection(Collection)>>do: @5 line 10
>>>>>>>>> 42.
>>>>>>>>> MetacelloLinearLoadDirective(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>> @3 line 3
>>>>>>>>> 43. MetacelloLinearLoadDirective>>loadUsing:gofer: @6 line 4
>>>>>>>>> 44. [] in
>>>>>>>>> UndefinedObject(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>> @8 line 3
>>>>>>>>> 45. OrderedCollection(Collection)>>do: @5 line 10
>>>>>>>>> 46.
>>>>>>>>> MetacelloLinearLoadDirective(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>> @3 line 3
>>>>>>>>> 47. MetacelloLinearLoadDirective>>loadUsing:gofer: @6 line 4
>>>>>>>>> 48. [] in
>>>>>>>>> UndefinedObject(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>> @8 line 3
>>>>>>>>> 49. OrderedCollection(Collection)>>do: @5 line 10
>>>>>>>>> 50.
>>>>>>>>> MetacelloLinearLoadDirective(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>> @3 line 3
>>>>>>>>> 51. MetacelloLinearLoadDirective>>loadUsing:gofer: @6 line 4
>>>>>>>>> 52.
>>>>>>>>> MetacelloLinearLoadDirective(MetacelloVersionLoadDirective)>>loadWithPolicy:
>>>>>>>>> @7 line 7
>>>>>>>>> 53. MetacelloLoaderPolicy>>load @6 line 4
>>>>>>>>> 54. MetacelloFetchingMCSpecLoader>>doLoad @4 line 3
>>>>>>>>> 55. [] in
>>>>>>>>> UndefinedObject(MetacelloMCVersion)>>doLoadRequiredFromArray: @40 line 12
>>>>>>>>> 56. MetacelloGemStonePlatform(MetacelloPlatform)>>do:displaying:
>>>>>>>>> @2 line 3
>>>>>>>>> 57. [] in MetacelloMCVersion>>doLoadRequiredFromArray: @31 line 12
>>>>>>>>> 58. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>> 59. MetacelloMCVersion>>doLoadRequiredFromArray: @22 line 16
>>>>>>>>> 60. Array(Collection)>>loadRequiredForMetacelloMCVersion: @2 line 3
>>>>>>>>> 61. MetacelloMCVersion>>load: @2 line 3
>>>>>>>>> 62. [] in
>>>>>>>>> MetacelloScriptEngine>>load:onProjectDownGrade:onProjectUpgrade: @18 line 16
>>>>>>>>> 63. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>> 64. [] in MetacelloScriptEngine>>handleNotificationsForAction: @20
>>>>>>>>> line 6
>>>>>>>>> 65. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>> 66. [] in MetacelloScriptEngine>>handleNotificationsForAction: @12
>>>>>>>>> line 14
>>>>>>>>> 67. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>> 68. [] in MetacelloScriptEngine>>handleNotificationsForAction: @6
>>>>>>>>> line 20
>>>>>>>>> 69. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>> 70. MetacelloScriptEngine>>handleNotificationsForAction: @2 line 24
>>>>>>>>> 71. [] in
>>>>>>>>> MetacelloScriptEngine>>load:onProjectDownGrade:onProjectUpgrade: @6 line 5
>>>>>>>>> 72. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>> 73. MetacelloProjectRegistration
>>>>>>>>> class>>copyRegistryRestoreOnErrorWhile: @8 line 14
>>>>>>>>> 74.
>>>>>>>>> MetacelloScriptEngine>>load:onProjectDownGrade:onProjectUpgrade: @2 line 3
>>>>>>>>> 75. MetacelloScriptEngine>>load: @2 line 3
>>>>>>>>> 76. MetacelloScriptEngine(Object)>>perform:withArguments: @1 line
>>>>>>>>> 12
>>>>>>>>> 77. [] in
>>>>>>>>> MetacelloScriptApiExecutor(MetacelloScriptExecutor)>>execute: @40 line 15
>>>>>>>>> 78. [] in MetacelloScriptApiExecutor>>executeString:do: @13 line 6
>>>>>>>>> 79. Array(Collection)>>do: @5 line 10
>>>>>>>>> 80. MetacelloScriptApiExecutor>>executeString:do: @6 line 4
>>>>>>>>> 81. String>>execute:against: @2 line 2
>>>>>>>>> 82. MetacelloScriptApiExecutor(MetacelloScriptExecutor)>>execute:
>>>>>>>>> @6 line 9
>>>>>>>>> 83. Metacello>>execute:args: @8 line 5
>>>>>>>>> 84. Metacello>>load: @2 line 2
>>>>>>>>> 85. [] in TDMetacelloTool>>basicProjectLoadFromSpec: @102 line 47
>>>>>>>>> 86. [] in GsDeployer>>deploy: @21 line 8
>>>>>>>>> 87. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>> 88. [] in GsDeployer>>deploy: @7 line 9
>>>>>>>>> 89. [] in MCPlatformSupport
>>>>>>>>> class>>commitOnAlmostOutOfMemoryDuring: @11 line 7
>>>>>>>>> 90. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>> 91. MCPlatformSupport class>>commitOnAlmostOutOfMemoryDuring: @6
>>>>>>>>> line 8
>>>>>>>>> 92. [] in UndefinedObject(GsDeployer)>>mcPlatformSupportDo: @13
>>>>>>>>> line 11
>>>>>>>>> 93. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>> 94. GsDeployer>>mcPlatformSupportDo: @9 line 12
>>>>>>>>> 95. GsDeployer>>deploy: @2 line 3
>>>>>>>>> 96. GsDeployer class>>bulkMigrate: @5 line 15
>>>>>>>>> 97. TDMetacelloTool>>basicProjectLoadFromSpec: @62 line 61
>>>>>>>>> 98.
>>>>>>>>> TDProjectSpecEntryDefinition>>projectLoadFromSpec:using:registration: @8
>>>>>>>>> line 5
>>>>>>>>> 99.
>>>>>>>>> TDMetacelloUnloadedProjectRegistrationDefinition(TDMetacelloProjectRegistrationDefinition)>>projectLoadFromSpec:using:
>>>>>>>>> @3 line 3
>>>>>>>>> 100. TDMetacelloTool>>projectLoadFromSpec:registration: @2 line 2
>>>>>>>>> 101. [] in TDMetacelloTool>>projectload @247 line 151
>>>>>>>>> 102. Dictionary(AbstractDictionary)>>at:ifPresent:ifAbsent: @3
>>>>>>>>> line 5
>>>>>>>>> 103. TDMetacelloTool>>projectload @62 line 148
>>>>>>>>> 104. TDMetacelloTool(Object)>>perform: @1 line 8
>>>>>>>>> 105. TDMetacelloTool class(TDAbstractDevTool
>>>>>>>>> class)>>performSubCommand:objIn:commandOptions:todeCommand: @26 line 23
>>>>>>>>> 106. [] in TDMetacelloTool class>>project @5 line 5
>>>>>>>>> 107. ExecBlock4(ExecBlock)>>cull:cull:cull:cull: @20 line 14
>>>>>>>>> 108. TDTopezServer>>evaluateCommand:objIn: @18 line 22
>>>>>>>>> 109. TDTopezServer>>evaluateSTONCommand: @9 line 6
>>>>>>>>> 110. Executed Code
>>>>>>>>> 111. GsNMethod class>>_gsReturnToC @1 line 11
>>>>>>>>>
>>>>>>>>> If I try to evaluate the expression 1.21s3 at the Workspace, the
>>>>>>>>> stack trace is:
>>>>>>>>>
>>>>>>>>> a CompileError occurred (error 1001), illegal exponent
>>>>>>>>> --------------------
>>>>>>>>> 1. CompileError(AbstractException)>>_outer:with: @9 line 20
>>>>>>>>> 2. CompileError(AbstractException)>>outer @2 line 19
>>>>>>>>> 3. [] in UndefinedObject(TDAbstractEnvironment)>>_compileBlock:
>>>>>>>>> @36 line 11
>>>>>>>>> 4. Array(Collection)>>do: @5 line 10
>>>>>>>>> 5. [] in
>>>>>>>>> TDStandardEnvironment(TDAbstractEnvironment)>>_compileBlock: @14 line 8
>>>>>>>>> 6. CompileError(AbstractException)>>_executeHandler: @7 line 11
>>>>>>>>> 7. CompileError(AbstractException)>>_signalFromPrimitive: @1 line 8
>>>>>>>>> 8.
>>>>>>>>> String>>_compileInContext:symbolList:oldLitVars:environmentId:flags: @1
>>>>>>>>> line 21
>>>>>>>>> 9. [] in
>>>>>>>>> UndefinedObject(TDAbstractEnvironment)>>_compile:inContext:literalVars:tempSymbolList:environmentId:
>>>>>>>>> @7 line 5
>>>>>>>>> 10. [] in
>>>>>>>>> TDStandardEnvironment(TDAbstractEnvironment)>>_compileBlock: @8 line 2
>>>>>>>>> 11. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>> 12. TDStandardEnvironment(TDAbstractEnvironment)>>_compileBlock:
>>>>>>>>> @3 line 3
>>>>>>>>> 13.
>>>>>>>>> TDStandardEnvironment(TDAbstractEnvironment)>>_compile:inContext:literalVars:tempSymbolList:environmentId:
>>>>>>>>> @2 line 3
>>>>>>>>> 14.
>>>>>>>>> TDStandardEnvironment(TDAbstractEnvironment)>>compile:inContext:literalVars:tempSymbolList:
>>>>>>>>> @3 line 3
>>>>>>>>> 15.
>>>>>>>>> TDStandardEnvironment(TDAbstractEnvironment)>>evaluate:in:literalVars:tempSymbolList:
>>>>>>>>> @2 line 3
>>>>>>>>> 16.
>>>>>>>>> TDTopezServer>>evaluateString:inContext:literalVars:withTempSymbolList: @4
>>>>>>>>> line 5
>>>>>>>>> 17. TDTopezServer>>evaluateString:inContext:literalVars: @3 line 3
>>>>>>>>> 18.
>>>>>>>>> TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>evaluateString:topez:
>>>>>>>>> @4 line 3
>>>>>>>>> 19.
>>>>>>>>> TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>doItMenuAction:selectedText:
>>>>>>>>> @3 line 2
>>>>>>>>> 20. TDWorkspaceClientElementBuilder(Object)>>perform:with:with: @1
>>>>>>>>> line 9
>>>>>>>>> 21.
>>>>>>>>> TDWorkspaceClientElementBuilder(TDWindowBuilder)>>handleMenuActions:listElement:actionArg:
>>>>>>>>> @12 line 10
>>>>>>>>> 22. [] in
>>>>>>>>> TDWorkspaceClientElementBuilder(TDClientSourceElementBuilder)>>menuActionBlock
>>>>>>>>> @9 line 8
>>>>>>>>> 23. ExecBlock>>valueWithArguments: @1 line 7
>>>>>>>>> 24. ExecBlock>>value:value:value:value:value: @2 line 11
>>>>>>>>> 25. GsNMethod class>>_gsReturnToC @1 line 11
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> My system is Archlinux on x86-64 (AMD Ryzen)
>>>>>>>>>
>>>>>>>>> uname -a:
>>>>>>>>>
>>>>>>>>> Linux titan 5.15.8-arch1-1 #1 SMP PREEMPT Tue, 14 Dec 2021
>>>>>>>>> 12:28:02 +0000 x86_64 GNU/Linux
>>>>>>>>>
>>>>>>>>> locale:
>>>>>>>>>
>>>>>>>>> LANG=es_AR.UTF-8
>>>>>>>>> LC_CTYPE="es_AR.UTF-8"
>>>>>>>>> LC_NUMERIC="es_AR.UTF-8"
>>>>>>>>> LC_TIME="es_AR.UTF-8"
>>>>>>>>> LC_COLLATE="es_AR.UTF-8"
>>>>>>>>> LC_MONETARY="es_AR.UTF-8"
>>>>>>>>> LC_MESSAGES="es_AR.UTF-8"
>>>>>>>>> LC_PAPER="es_AR.UTF-8"
>>>>>>>>> LC_NAME="es_AR.UTF-8"
>>>>>>>>> LC_ADDRESS="es_AR.UTF-8"
>>>>>>>>> LC_TELEPHONE="es_AR.UTF-8"
>>>>>>>>> LC_MEASUREMENT="es_AR.UTF-8"
>>>>>>>>> LC_IDENTIFICATION="es_AR.UTF-8"
>>>>>>>>> LC_ALL=es_AR.UTF-8
>>>>>>>>>
>>>>>>>>> I have installed all the prerequisites by hand first, but if you
>>>>>>>>> think it's necessary I can try to install a VM with Ubuntu.
>>>>>>>>>
>>>>>>>>> Thank you very much!
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Ezequiel R. Aguerre
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> El lun, 10 ene 2022 a la(s) 23:25, Dale Henrichs (
>>>>>>>>> dale.henrichs at gemtalksystems.com) escribió:
>>>>>>>>>
>>>>>>>>>> Ezequiel,
>>>>>>>>>>
>>>>>>>>>> The good news is that we HAVE identified the compile error so
>>>>>>>>>> that IS progress!
>>>>>>>>>>
>>>>>>>>>> I've tried evaluating the same expressions in my 3.6.3 tODE image
>>>>>>>>>> and I get:
>>>>>>>>>> [image: image.png]
>>>>>>>>>>
>>>>>>>>>> So there is definitely something odd going on ...
>>>>>>>>>>
>>>>>>>>>> Could you provide the whole stack for the CompileError that you
>>>>>>>>>> are seeing (just the frames list for now) and information about the OS that
>>>>>>>>>> you are running on ... a print window of the `project list`, too, just to
>>>>>>>>>> cover our bases ...
>>>>>>>>>>
>>>>>>>>>> I will talk it over with some of the guys in the (virtual) office
>>>>>>>>>> tomorrow to see if we can get to the bottom of this for you...
>>>>>>>>>>
>>>>>>>>>> Dale
>>>>>>>>>>
>>>>>>>>>> On Mon, Jan 10, 2022 at 5:28 PM Ezequiel R. Aguerre <
>>>>>>>>>> ezeaguerre at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Well, I reinstalled everything from scratch. Seaside installed
>>>>>>>>>>> fine, but when I execute the "load" command it fails with the same error :(
>>>>>>>>>>>
>>>>>>>>>>> Here is the error string:
>>>>>>>>>>>
>>>>>>>>>>> testGreaseString
>>>>>>>>>>> self assert: 'Timberwolf' greaseString = 'Timberwolf'.
>>>>>>>>>>> self assert: #DireWolf greaseString = 'DireWolf'.
>>>>>>>>>>> self deny: #DireWolf greaseString isSymbol.
>>>>>>>>>>> self assert: true greaseString = 'true'.
>>>>>>>>>>> self assert: 666 greaseString = '666'.
>>>>>>>>>>> "make sure we're not immediate"
>>>>>>>>>>> self assert: ((2 raisedTo: 64) + 1) greaseString =
>>>>>>>>>>> '18446744073709551617'.
>>>>>>>>>>> "make sure we're not immediate"
>>>>>>>>>>> self assert: ((2 raisedTo: 64) + 1) negated
>>>>>>>>>>> greaseString = '-18446744073709551617'.
>>>>>>>>>>> self assert: $A greaseString = 'A'.
>>>>>>>>>>> self assert: nil greaseString = 'nil'.
>>>>>>>>>>> [ "Smalltalk/X has constant folding so 1 / 0
>>>>>>>>>>> will be evaluated at compile time
>>>>>>>>>>> resulting in an error when loading the code."
>>>>>>>>>>> 1 perform: #/ with: 0 ]
>>>>>>>>>>> on: ZeroDivide
>>>>>>>>>>> do: [ :error | self assert: error
>>>>>>>>>>> greaseString isString ].
>>>>>>>>>>> self assert: 15.25 greaseString = '15.25'.
>>>>>>>>>>> self assert: nil greaseString isString.
>>>>>>>>>>> self assert: (4 @ 2) greaseString = '4 at 2'.
>>>>>>>>>>> "#greaseString for a byte array should not do any
>>>>>>>>>>> decoding
>>>>>>>>>>> this is in place to catch encoding errors early"
>>>>>>>>>>> self assert: #(101 97 ) asByteArray greaseString ~=
>>>>>>>>>>> 'ea'.
>>>>>>>>>>> self assert: #(101 97 ) asByteArray greaseString
>>>>>>>>>>> isString.
>>>>>>>>>>> self assert: Object new greaseString isString.
>>>>>>>>>>> "Printing scaled decimals (
>>>>>>>>>>> https://github.com/SeasideSt/Grease/issues/1)"
>>>>>>>>>>> self assert: 1.21s3 greaseString = '1.210'.
>>>>>>>>>>> * ^1
>>>>>>>>>>> *******
>>>>>>>>>>> self assert: -1.21s3 greaseString = '-1.210'
>>>>>>>>>>> * ^2
>>>>>>>>>>> *******
>>>>>>>>>>>
>>>>>>>>>>> 1: [1028] illegal exponent
>>>>>>>>>>> 2: [1028] illegal exponent
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> It's weird, it should be working I suppose...
>>>>>>>>>>>
>>>>>>>>>>> If I open a Pharo Workspace it works fine, but on the Workspace
>>>>>>>>>>> of the gem it won't work (if I understand correctly, the second workspace
>>>>>>>>>>> is executing on the Smalltalk of the "Gem" process). I attach an image of
>>>>>>>>>>> the issue.
>>>>>>>>>>>
>>>>>>>>>>> Looking the documentation, it seems GemStone should support
>>>>>>>>>>> scaled decimals:
>>>>>>>>>>> https://downloads.gemtalksystems.com/docs/GemStone64/3.2.x/GS64-ProgGuide-3.2/6-Numerics.htm#pgfId-265610
>>>>>>>>>>>
>>>>>>>>>>> However, I haven't seen any reference to the ScaledDecimal class
>>>>>>>>>>> or support for literals of that type in the programming guide of the latest
>>>>>>>>>>> version:
>>>>>>>>>>> https://downloads.gemtalksystems.com/docs/GemStone32/6.0.x/GSS-ProgGuide-6.0.pdf
>>>>>>>>>>> and the BNF section near the end of the PDF doesn't seem to support the
>>>>>>>>>>> scaled decimal literals...
>>>>>>>>>>>
>>>>>>>>>>> Maybe I'm missing some support from the compiler? Maybe I need
>>>>>>>>>>> to install or load something that I don't have loaded on my system?
>>>>>>>>>>>
>>>>>>>>>>> Thank you very much! I'll keep trying other things
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Ezequiel R. Aguerre
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> El vie, 7 ene 2022 a la(s) 21:42, Dale Henrichs (
>>>>>>>>>>> dale.henrichs at gemtalksystems.com) escribió:
>>>>>>>>>>>
>>>>>>>>>>>> Ezequiel,
>>>>>>>>>>>>
>>>>>>>>>>>> Good work, so far you have done all of the right things and at
>>>>>>>>>>>> the moment I'm a bit stymied on the compile error you are seeing ... I have
>>>>>>>>>>>> confirmed that you are using the latest available SHA in all of the loaded
>>>>>>>>>>>> projects and determined that I do not have the latest SHA on my machine,
>>>>>>>>>>>> but the differences are all do to work I had done recently to convert the
>>>>>>>>>>>> projects to use github ci instead of travis so the code bases are
>>>>>>>>>>>> identical...
>>>>>>>>>>>>
>>>>>>>>>>>> Now, I didn't load Seaside into my image (yet), but I did load
>>>>>>>>>>>> the Grease project tests using:
>>>>>>>>>>>>
>>>>>>>>>>>>> project load --loads=`#('Tests')` Grease
>>>>>>>>>>>>
>>>>>>>>>>>> and GRPlatformTest>>testGreaseString loads without error ... I
>>>>>>>>>>>> copied the source that you pasted into your message, and compiled it in my
>>>>>>>>>>>> image without error ... but I did get the following diffs (white space
>>>>>>>>>>>> difference in two multiline comments) and the diffs are due to the mailer
>>>>>>>>>>>> stripping out tabs:
>>>>>>>>>>>>
>>>>>>>>>>>>> ____________________ Grease ____________________
>>>>>>>>>>>>> ==================== Grease-Tests-Core (-) --> image (+)
>>>>>>>>>>>>> ====================
>>>>>>>>>>>>> Item was changed:
>>>>>>>>>>>>> ----- Method: GRPlatformTest>>testGreaseString (in category
>>>>>>>>>>>>> 'tests') -----testGreaseString
>>>>>>>>>>>>> self assert: 'Timberwolf' greaseString = 'Timberwolf'.
>>>>>>>>>>>>> self assert: #'DireWolf' greaseString = 'DireWolf'.
>>>>>>>>>>>>> self deny: #'DireWolf' greaseString isSymbol.
>>>>>>>>>>>>> self assert: true greaseString = 'true'.
>>>>>>>>>>>>> self assert: 666 greaseString = '666'. "make sure we're not
>>>>>>>>>>>>> immediate"
>>>>>>>>>>>>> self assert: ((2 raisedTo: 64) + 1) greaseString =
>>>>>>>>>>>>> '18446744073709551617'. "make sure we're not immediate"
>>>>>>>>>>>>> self
>>>>>>>>>>>>> assert: ((2 raisedTo: 64) + 1) negated greaseString =
>>>>>>>>>>>>> '-18446744073709551617'.
>>>>>>>>>>>>> self assert: $A greaseString = 'A'.
>>>>>>>>>>>>> self assert: nil greaseString = 'nil'.
>>>>>>>>>>>>> [
>>>>>>>>>>>>> "Smalltalk/X has constant folding so 1 / 0 will be evaluated
>>>>>>>>>>>>> at compile time
>>>>>>>>>>>>> + resulting in an error when loading the code."
>>>>>>>>>>>>> - resulting in an error when loading the code."
>>>>>>>>>>>>> 1 perform: #'/' with: 0 ]
>>>>>>>>>>>>> on: ZeroDivide
>>>>>>>>>>>>> do: [ :error | self assert: error greaseString isString ].
>>>>>>>>>>>>> self assert: 15.25 greaseString = '15.25'.
>>>>>>>>>>>>> self assert: nil greaseString isString.
>>>>>>>>>>>>> self assert: (4 @ 2) greaseString = '4 at 2'. "#greaseString
>>>>>>>>>>>>> for a byte array should not do any decoding
>>>>>>>>>>>>> + this is in place to catch encoding errors early"
>>>>>>>>>>>>> - this is in place to catch encoding errors early"
>>>>>>>>>>>>> self assert: #(101 97) asByteArray greaseString ~= 'ea'.
>>>>>>>>>>>>> self assert: #(101 97) asByteArray greaseString isString.
>>>>>>>>>>>>> self assert: Object new greaseString isString. "Printing
>>>>>>>>>>>>> scaled decimals (https://github.com/SeasideSt/Grease/issues/1
>>>>>>>>>>>>> )"
>>>>>>>>>>>>> self assert: 1.21s3 greaseString = '1.210'.
>>>>>>>>>>>>> self assert: -1.21s3 greaseString = '-1.210'!
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> So you are right, there are no syntax errors in the source...
>>>>>>>>>>>>
>>>>>>>>>>>> If your next attempt ends up with a compile error again, select
>>>>>>>>>>>> the #compileMethod:category: frame (frame 4 in your stack) and click on the
>>>>>>>>>>>> `errorString` temp var in the inspector and in the String inspector use the
>>>>>>>>>>>> Object >> print menu item:
>>>>>>>>>>>> [image: image.png]
>>>>>>>>>>>>
>>>>>>>>>>>> To get a readable display of the compilation error ... in my
>>>>>>>>>>>> case I attempted to compile `testGreaseString "a` and got the following
>>>>>>>>>>>> (using png, because tODE uses a fixed width font and the error display is
>>>>>>>>>>>> formatted assuming a fixed width font):
>>>>>>>>>>>> [image: image.png]
>>>>>>>>>>>>
>>>>>>>>>>>> Given the fact that you copied the method source and there are
>>>>>>>>>>>> no compile errors in the source, the problem might be related to an
>>>>>>>>>>>> unexpected string encoding (so a screen shot like mine above will give us a
>>>>>>>>>>>> clue as to the class of the source) or ???
>>>>>>>>>>>>
>>>>>>>>>>>> Dale
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Fri, Jan 7, 2022 at 2:07 PM Ezequiel R. Aguerre <
>>>>>>>>>>>> ezeaguerre at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi!
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks for the help!
>>>>>>>>>>>>>
>>>>>>>>>>>>> I created the stone and client from scratch, just to be sure:
>>>>>>>>>>>>>
>>>>>>>>>>>>> createStone devKit_363 3.6.3
>>>>>>>>>>>>> createClient devKit_363
>>>>>>>>>>>>>
>>>>>>>>>>>>> The testLogin commands gives:
>>>>>>>>>>>>>
>>>>>>>>>>>>> tode 1 > testLogin
>>>>>>>>>>>>> Stone : !@titan#server!devKit_363
>>>>>>>>>>>>> Stone host : titan
>>>>>>>>>>>>> GemStone version : 3.6.3
>>>>>>>>>>>>> cpu kind : x86_64
>>>>>>>>>>>>> GLASS version : >=1.0-beta.8.5.1 [ConfigurationOfGLASS]
>>>>>>>>>>>>> Metacello version: >=1.0-beta.32.3 [ConfigurationOfMetacello]
>>>>>>>>>>>>> GLASS1:
>>>>>>>>>>>>> repository:
>>>>>>>>>>>>> /home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/glass/repository
>>>>>>>>>>>>> Tode:
>>>>>>>>>>>>> repository:
>>>>>>>>>>>>> /home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/tode/repository
>>>>>>>>>>>>>
>>>>>>>>>>>>> At this moment, with the what I suppose is the fresh install,
>>>>>>>>>>>>> the project list is:
>>>>>>>>>>>>>
>>>>>>>>>>>>> aTDMetacelloProjectBrowser
>>>>>>>>>>>>> --------------------
>>>>>>>>>>>>> + GsDevKit_home e3b4149 [master] $GS_HOME
>>>>>>>>>>>>> |Foo|
>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/Foo/repository
>>>>>>>>>>>>> |NeoJSON|
>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/NeoJSON/repository
>>>>>>>>>>>>> |FileTree| 28ab532 [gemstone2.4]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/filetree/repository
>>>>>>>>>>>>> |GLASS1| b3209f2d [master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/glass/repository
>>>>>>>>>>>>> Gofer 1.0.5.4 [release]
>>>>>>>>>>>>> http://seaside.gemtalksystems.com/ss/metacello
>>>>>>>>>>>>> |Grease| eef515d [master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/Grease/repository
>>>>>>>>>>>>> |Metacello| e3963155 [master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/metacello-work/repository
>>>>>>>>>>>>> |RB| 00d0408 [dev]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/rb/repository
>>>>>>>>>>>>> |Ston| daadc02 [gemstone]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/ston/repository
>>>>>>>>>>>>> |Tode| 60a33e11c [master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/tode/repository
>>>>>>>>>>>>> |ZincHTTPComponents| 2c834394 [gs_master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/zinc/repository
>>>>>>>>>>>>> |Zodiac| 0cf6770 [gs_master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/zodiac/repository
>>>>>>>>>>>>> |GsApplicationTools|
>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/gsApplicationTools/repository
>>>>>>>>>>>>> |PharoCompatibility|
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/PharoCompatibility/repository
>>>>>>>>>>>>> Seaside3
>>>>>>>>>>>>> github://GsDevKit/Seaside31:3.1.?/repository
>>>>>>>>>>>>> |SmalltalkCI|
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/smalltalkCI/repository
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Then, I try to install Seaside:
>>>>>>>>>>>>>
>>>>>>>>>>>>> project install --url=
>>>>>>>>>>>>> http://gsdevkit.github.io/GsDevKit_home/Seaside32.ston
>>>>>>>>>>>>>
>>>>>>>>>>>>> At this time, I get a "growl morph" notification saying:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Information
>>>>>>>>>>>>> A project entry for 'Seaside3' is already defined in this
>>>>>>>>>>>>> stones' /projects node,
>>>>>>>>>>>>> download skipped.
>>>>>>>>>>>>>
>>>>>>>>>>>>> And I get the following error:
>>>>>>>>>>>>>
>>>>>>>>>>>>> UserDefinedError: Error during download: 'a ArgumentError
>>>>>>>>>>>>> occurred (error 2004), reason:rtErrBadSubscript, A subscript ''message''
>>>>>>>>>>>>> that w...
>>>>>>>>>>>>> --------------------
>>>>>>>>>>>>> 1. UserDefinedError(AbstractException)>>_signalWith: @5 line 25
>>>>>>>>>>>>> 2. UserDefinedError(AbstractException)>>signal @2 line 47
>>>>>>>>>>>>> 3. MetacelloGemStonePlatform(Object)>>error: @6 line 7
>>>>>>>>>>>>> 4. [] in
>>>>>>>>>>>>> MetacelloGemStonePlatform>>downloadJSON:eTagsCache:eTagsKey:username:pass:
>>>>>>>>>>>>> @34 line 28
>>>>>>>>>>>>> 5. [] in
>>>>>>>>>>>>> UndefinedObject(MetacelloGemStonePlatform)>>downloadJSON:eTagsCache:eTagsKey:username:pass:
>>>>>>>>>>>>> @106 line 73
>>>>>>>>>>>>> 6. ArgumentError(AbstractException)>>_executeHandler: @7 line
>>>>>>>>>>>>> 11
>>>>>>>>>>>>> 7. ArgumentError(AbstractException)>>_signalWith: @1 line 2
>>>>>>>>>>>>> 8. ArgumentError(AbstractException)>>signal @2 line 47
>>>>>>>>>>>>> 9. Array(Object)>>_error:args: @15 line 11
>>>>>>>>>>>>> 10. Array(Object)>>_errorNonIntegerIndex: @2 line 5
>>>>>>>>>>>>> 11. Array>>at: @6 line 13
>>>>>>>>>>>>> 12. [] in
>>>>>>>>>>>>> MetacelloGemStonePlatform>>downloadJSON:eTagsCache:eTagsKey:username:pass:
>>>>>>>>>>>>> @92 line 68
>>>>>>>>>>>>> 13. MetacelloGemStonePlatform>>extractHTTPHeader:do: @33 line
>>>>>>>>>>>>> 26
>>>>>>>>>>>>> 14. [] in
>>>>>>>>>>>>> MetacelloGemStonePlatform>>downloadJSON:eTagsCache:eTagsKey:username:pass:
>>>>>>>>>>>>> @55 line 39
>>>>>>>>>>>>> 15. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>>>>>> 16. [] in
>>>>>>>>>>>>> UndefinedObject(MetacelloGemStonePlatform)>>downloadJSON:eTagsCache:eTagsKey:username:pass:
>>>>>>>>>>>>> @45 line 72
>>>>>>>>>>>>> 17. [] in
>>>>>>>>>>>>> UndefinedObject(FileDirectory)>>readOnlyFileNamed:do: @8 line 4
>>>>>>>>>>>>> 18. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>>>>>> 19. ServerFileDirectory(FileDirectory)>>readOnlyFileNamed:do:
>>>>>>>>>>>>> @4 line 4
>>>>>>>>>>>>> 20.
>>>>>>>>>>>>> MetacelloGemStonePlatform>>downloadJSON:eTagsCache:eTagsKey:username:pass:
>>>>>>>>>>>>> @17 line 32
>>>>>>>>>>>>> 21. MCGitHubRepository>>downloadJSONTags @13 line 5
>>>>>>>>>>>>> 22.
>>>>>>>>>>>>> MCGitHubRepository(MCGitBasedNetworkRepository)>>resolveProjectVersionPattern:
>>>>>>>>>>>>> @9 line 8
>>>>>>>>>>>>> 23.
>>>>>>>>>>>>> MCGitHubRepository(MCGitBasedNetworkRepository)>>projectVersion: @10 line 15
>>>>>>>>>>>>> 24.
>>>>>>>>>>>>> MCGitHubRepository(MCGitBasedNetworkRepository)>>projectPath:projectVersion:repoPath:
>>>>>>>>>>>>> @3 line 3
>>>>>>>>>>>>> 25. MCGitHubRepository class(MCGitBasedNetworkRepository
>>>>>>>>>>>>> class)>>parseLocation:version: @47 line 36
>>>>>>>>>>>>> 26. MCGitHubRepository class(MCGitBasedNetworkRepository
>>>>>>>>>>>>> class)>>location:version: @2 line 2
>>>>>>>>>>>>> 27. MCGitHubRepository class(MCGitBasedNetworkRepository
>>>>>>>>>>>>> class)>>location: @2 line 2
>>>>>>>>>>>>> 28. [] in
>>>>>>>>>>>>> MetacelloGemStonePlatform(MetacelloPlatform)>>createRepository: @76 line 44
>>>>>>>>>>>>> 29. SmalltalkProxy>>at:ifPresent: @10 line 7
>>>>>>>>>>>>> 30.
>>>>>>>>>>>>> MetacelloGemStonePlatform(MetacelloPlatform)>>createRepository: @20 line 41
>>>>>>>>>>>>> 31. MetacelloGemStonePlatform>>createRepository: @53 line 45
>>>>>>>>>>>>> 32.
>>>>>>>>>>>>> MetacelloMCBaselineProject(MetacelloMCProject)>>createRepository: @3 line 3
>>>>>>>>>>>>> 33. MetacelloRepositorySpec>>createRepository @3 line 3
>>>>>>>>>>>>> 34.
>>>>>>>>>>>>> TDMetacelloTool>>projectClone:cloneWithSSH:defaultProjectEntryPath:gitRootPath:checkout:
>>>>>>>>>>>>> @22 line 33
>>>>>>>>>>>>> 35. [] in TDMetacelloTool>>projectclone @55 line 70
>>>>>>>>>>>>> 36. Dictionary(AbstractDictionary)>>at:ifPresent:ifAbsent: @3
>>>>>>>>>>>>> line 5
>>>>>>>>>>>>> 37. TDMetacelloTool>>projectclone @4 line 24
>>>>>>>>>>>>> 38. TDMetacelloTool(Object)>>perform: @1 line 8
>>>>>>>>>>>>> 39. TDMetacelloTool class(TDAbstractDevTool
>>>>>>>>>>>>> class)>>performSubCommand:objIn:commandOptions:todeCommand: @26 line 23
>>>>>>>>>>>>> 40. [] in TDMetacelloTool class>>project @5 line 5
>>>>>>>>>>>>> 41. ExecBlock4(ExecBlock)>>cull:cull:cull:cull: @20 line 14
>>>>>>>>>>>>> 42. TDTopezServer>>evaluateCommand:objIn: @18 line 22
>>>>>>>>>>>>> 43. [] in TDTopezServer>>evaluateCommandStream: @8 line 6
>>>>>>>>>>>>> 44. [] in TDCommandLine class>>line:forEachCommand: @19 line 12
>>>>>>>>>>>>> 45. OrderedCollection(Collection)>>do: @5 line 10
>>>>>>>>>>>>> 46. TDCommandLine class>>line:forEachCommand: @3 line 5
>>>>>>>>>>>>> 47. [] in TDCommandLine
>>>>>>>>>>>>> class>>fromStream:selectLine:forEachCommand: @39 line 28
>>>>>>>>>>>>> 48. OrderedCollection(Collection)>>do: @5 line 10
>>>>>>>>>>>>> 49. TDCommandLine class>>fromStream:selectLine:forEachCommand:
>>>>>>>>>>>>> @33 line 26
>>>>>>>>>>>>> 50. TDCommandLine class>>fromStream:forEachCommand: @2 line 4
>>>>>>>>>>>>> 51. TDTopezServer>>evaluateCommandStream: @2 line 4
>>>>>>>>>>>>> 52. TDTopezServer>>evaluateCommandString: @3 line 2
>>>>>>>>>>>>> 53. [] in
>>>>>>>>>>>>> TDProjectSpecEntryDefinition(TDProjectEntryDefinition)>>installProjectUsing:registration:
>>>>>>>>>>>>> @11 line 4
>>>>>>>>>>>>> 54. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>>>>>> 55.
>>>>>>>>>>>>> TDProjectSpecEntryDefinition(TDProjectEntryDefinition)>>installProjectUsing:registration:
>>>>>>>>>>>>> @5 line 5
>>>>>>>>>>>>> 56.
>>>>>>>>>>>>> TDMetacelloUnloadedProjectRegistrationDefinition(TDMetacelloProjectRegistrationDefinition)>>installProjectUsing:
>>>>>>>>>>>>> @3 line 2
>>>>>>>>>>>>> 57. TDMetacelloTool>>projectInstallFor: @2 line 2
>>>>>>>>>>>>> 58. TDMetacelloTool>>projectInstall: @4 line 4
>>>>>>>>>>>>> 59. TDMetacelloTool>>projectinstall @4 line 31
>>>>>>>>>>>>> 60. TDMetacelloTool(Object)>>perform: @1 line 8
>>>>>>>>>>>>> 61. TDMetacelloTool class(TDAbstractDevTool
>>>>>>>>>>>>> class)>>performSubCommand:objIn:commandOptions:todeCommand: @26 line 23
>>>>>>>>>>>>> 62. [] in TDMetacelloTool class>>project @5 line 5
>>>>>>>>>>>>> 63. ExecBlock4(ExecBlock)>>cull:cull:cull:cull: @20 line 14
>>>>>>>>>>>>> 64. TDTopezServer>>evaluateCommand:objIn: @18 line 22
>>>>>>>>>>>>> 65. TDTopezServer>>evaluateSTONCommand: @9 line 6
>>>>>>>>>>>>> 66. Executed Code
>>>>>>>>>>>>> 67. GsNMethod class>>_gsReturnToC @1 line 11
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> The error seems to be the same that when I tried to load the
>>>>>>>>>>>>> packages. The inspector window gives the following information:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> [] in
>>>>>>>>>>>>> MetacelloGemStonePlatform>>downloadJSON:eTagsCache:eTagsKey:username:pass:
>>>>>>>>>>>>> @92 line 68
>>>>>>>>>>>>> --------------------
>>>>>>>>>>>>> . -> [] in
>>>>>>>>>>>>> MetacelloGemStonePlatform>>downloadJSON:eTagsCache:eTagsKey:username:pass:
>>>>>>>>>>>>> @92 line 68
>>>>>>>>>>>>> self -> aMetacelloGemStonePlatform
>>>>>>>>>>>>> errorBlock -> anExecBlock2
>>>>>>>>>>>>> errorFileName -> '/tmp/curl-8880-tmptags8880json.err'
>>>>>>>>>>>>> etagInfo -> aDictionary( )
>>>>>>>>>>>>> eTagsCache -> aDictionary(
>>>>>>>>>>>>> 'GsDevKit/Seaside31'->aDictionary( ))
>>>>>>>>>>>>> eTagsKey -> 'GsDevKit/Seaside31'
>>>>>>>>>>>>> eTagsUrl -> '
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tags'
>>>>>>>>>>>>> fileStream -> aBinaryOrTextFile
>>>>>>>>>>>>> headerDict -> aDictionary( 'x-xss-protection'->'0',
>>>>>>>>>>>>> 'x-ratelimit-remaining'->'59', 'vary'->'Accept, Accept-Encoding, Accept,
>>>>>>>>>>>>> X-Requested-With', 'etag'-...
>>>>>>>>>>>>> jsonFile -> aServerFileDirectory
>>>>>>>>>>>>> jsonFileName -> '/tmp/tags-8880.json'
>>>>>>>>>>>>> jsonObject -> anArray[207044097]( aDictionary(
>>>>>>>>>>>>> 'commit'->aDictionary( 'sha'->'55f1bac4334065c80a89f9f81b2d57e61d8b01c3',
>>>>>>>>>>>>> 'url'->'https://api.github.com...
>>>>>>>>>>>>> pass -> nil
>>>>>>>>>>>>> payload -> '[ { "name": "v3.1.4.2-gs", "zipball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/zipball/refs/tags/v3.1.4.2-gs",
>>>>>>>>>>>>> "t. . .'
>>>>>>>>>>>>> status -> '403'
>>>>>>>>>>>>> tag -> nil
>>>>>>>>>>>>> url -> '
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tags'
>>>>>>>>>>>>> username -> nil
>>>>>>>>>>>>> (thisContext) -> [] in
>>>>>>>>>>>>> MetacelloGemStonePlatform>>downloadJSON:eTagsCache:eTagsKey:username:pass:
>>>>>>>>>>>>> @92 line 68
>>>>>>>>>>>>>
>>>>>>>>>>>>> The file '/tmp/curl-8880-tmptags8880json.err' has the
>>>>>>>>>>>>> following contents:
>>>>>>>>>>>>>
>>>>>>>>>>>>> -----START OF FILE-----
>>>>>>>>>>>>> % Total % Received % Xferd Average Speed Time Time
>>>>>>>>>>>>> Time Current
>>>>>>>>>>>>> Dload Upload Total Spent
>>>>>>>>>>>>> Left Speed
>>>>>>>>>>>>>
>>>>>>>>>>>>> 0 0 0 0 0 0 0 0 --:--:--
>>>>>>>>>>>>> --:--:-- --:--:-- 0
>>>>>>>>>>>>> 6 4419 6 295 0 0 660 0 0:00:06
>>>>>>>>>>>>> --:--:-- 0:00:06 659
>>>>>>>>>>>>> 100 4419 100 4419 0 0 9870 0 --:--:--
>>>>>>>>>>>>> --:--:-- --:--:-- 9863
>>>>>>>>>>>>> -----END OF FILE-----
>>>>>>>>>>>>>
>>>>>>>>>>>>> The file '/tmp/tags-8880.json' has the following contents:
>>>>>>>>>>>>>
>>>>>>>>>>>>> -----START OF FILE-----
>>>>>>>>>>>>> HTTP/2 200
>>>>>>>>>>>>> server: GitHub.com
>>>>>>>>>>>>> date: Fri, 07 Jan 2022 21:35:05 GMT
>>>>>>>>>>>>> content-type: application/json; charset=utf-8
>>>>>>>>>>>>> cache-control: public, max-age=60, s-maxage=60
>>>>>>>>>>>>> vary: Accept, Accept-Encoding, Accept, X-Requested-With
>>>>>>>>>>>>> etag:
>>>>>>>>>>>>> W/"6cec2f5c39604a85c812b3f81160363597deeb49b5387df7e75866b339cda9a2"
>>>>>>>>>>>>> last-modified: Tue, 16 Apr 2019 18:33:33 GMT
>>>>>>>>>>>>> x-github-media-type: github.v3; format=json
>>>>>>>>>>>>> access-control-expose-headers: ETag, Link, Location,
>>>>>>>>>>>>> Retry-After, X-GitHub-OTP, X-RateLimit-Limit, X-RateLimit-Remaining,
>>>>>>>>>>>>> X-RateLimit-Used, X-RateLimit-Resource, X-RateLimit-Reset, X-OAuth-Scopes,
>>>>>>>>>>>>> X-Accepted-OAuth-Scopes, X-Poll-Interval, X-GitHub-Media-Type,
>>>>>>>>>>>>> X-GitHub-SSO, X-GitHub-Request-Id, Deprecation, Sunset
>>>>>>>>>>>>> access-control-allow-origin: *
>>>>>>>>>>>>> strict-transport-security: max-age=31536000;
>>>>>>>>>>>>> includeSubdomains; preload
>>>>>>>>>>>>> x-frame-options: deny
>>>>>>>>>>>>> x-content-type-options: nosniff
>>>>>>>>>>>>> x-xss-protection: 0
>>>>>>>>>>>>> referrer-policy: origin-when-cross-origin,
>>>>>>>>>>>>> strict-origin-when-cross-origin
>>>>>>>>>>>>> content-security-policy: default-src 'none'
>>>>>>>>>>>>> x-ratelimit-limit: 60
>>>>>>>>>>>>> x-ratelimit-remaining: 59
>>>>>>>>>>>>> x-ratelimit-reset: 1641594905
>>>>>>>>>>>>> x-ratelimit-resource: core
>>>>>>>>>>>>> x-ratelimit-used: 1
>>>>>>>>>>>>> accept-ranges: bytes
>>>>>>>>>>>>> content-length: 4419
>>>>>>>>>>>>> x-github-request-id: 834A:138F:112672:13821B:61D8B209
>>>>>>>>>>>>>
>>>>>>>>>>>>> [
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "v3.1.4.2-gs",
>>>>>>>>>>>>> "zipball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/zipball/refs/tags/v3.1.4.2-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "tarball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tarball/refs/tags/v3.1.4.2-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "commit": {
>>>>>>>>>>>>> "sha": "55f1bac4334065c80a89f9f81b2d57e61d8b01c3",
>>>>>>>>>>>>> "url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/commits/55f1bac4334065c80a89f9f81b2d57e61d8b01c3
>>>>>>>>>>>>> "
>>>>>>>>>>>>> },
>>>>>>>>>>>>> "node_id":
>>>>>>>>>>>>> "MDM6UmVmODYzMzA2ODpyZWZzL3RhZ3MvdjMuMS40LjItZ3M="
>>>>>>>>>>>>> },
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "v3.1.4.1-gs",
>>>>>>>>>>>>> "zipball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/zipball/refs/tags/v3.1.4.1-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "tarball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tarball/refs/tags/v3.1.4.1-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "commit": {
>>>>>>>>>>>>> "sha": "839c99bef7328014a5feb5ad1b11f68ac3f38b5d",
>>>>>>>>>>>>> "url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/commits/839c99bef7328014a5feb5ad1b11f68ac3f38b5d
>>>>>>>>>>>>> "
>>>>>>>>>>>>> },
>>>>>>>>>>>>> "node_id":
>>>>>>>>>>>>> "MDM6UmVmODYzMzA2ODpyZWZzL3RhZ3MvdjMuMS40LjEtZ3M="
>>>>>>>>>>>>> },
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "v3.1.4-gs",
>>>>>>>>>>>>> "zipball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/zipball/refs/tags/v3.1.4-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "tarball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tarball/refs/tags/v3.1.4-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "commit": {
>>>>>>>>>>>>> "sha": "72a2da4fe2a4ba1030cea00152e8768ef7d2de13",
>>>>>>>>>>>>> "url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/commits/72a2da4fe2a4ba1030cea00152e8768ef7d2de13
>>>>>>>>>>>>> "
>>>>>>>>>>>>> },
>>>>>>>>>>>>> "node_id": "MDM6UmVmODYzMzA2ODpyZWZzL3RhZ3MvdjMuMS40LWdz"
>>>>>>>>>>>>> },
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "v3.1.3.1-gs",
>>>>>>>>>>>>> "zipball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/zipball/refs/tags/v3.1.3.1-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "tarball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tarball/refs/tags/v3.1.3.1-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "commit": {
>>>>>>>>>>>>> "sha": "4a81a77a6099f4e0860e0eea3b712e733071b54a",
>>>>>>>>>>>>> "url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/commits/4a81a77a6099f4e0860e0eea3b712e733071b54a
>>>>>>>>>>>>> "
>>>>>>>>>>>>> },
>>>>>>>>>>>>> "node_id":
>>>>>>>>>>>>> "MDM6UmVmODYzMzA2ODpyZWZzL3RhZ3MvdjMuMS4zLjEtZ3M="
>>>>>>>>>>>>> },
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "v3.1.3-gs",
>>>>>>>>>>>>> "zipball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/zipball/refs/tags/v3.1.3-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "tarball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tarball/refs/tags/v3.1.3-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "commit": {
>>>>>>>>>>>>> "sha": "5e9d3fd2a25f69eda78a4d5cf085b90fa04ebed5",
>>>>>>>>>>>>> "url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/commits/5e9d3fd2a25f69eda78a4d5cf085b90fa04ebed5
>>>>>>>>>>>>> "
>>>>>>>>>>>>> },
>>>>>>>>>>>>> "node_id": "MDM6UmVmODYzMzA2ODpyZWZzL3RhZ3MvdjMuMS4zLWdz"
>>>>>>>>>>>>> },
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "v3.1.2.1-gs",
>>>>>>>>>>>>> "zipball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/zipball/refs/tags/v3.1.2.1-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "tarball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tarball/refs/tags/v3.1.2.1-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "commit": {
>>>>>>>>>>>>> "sha": "b739758692a49257ae983f59e1d8dc51012dc5b7",
>>>>>>>>>>>>> "url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/commits/b739758692a49257ae983f59e1d8dc51012dc5b7
>>>>>>>>>>>>> "
>>>>>>>>>>>>> },
>>>>>>>>>>>>> "node_id":
>>>>>>>>>>>>> "MDM6UmVmODYzMzA2ODpyZWZzL3RhZ3MvdjMuMS4yLjEtZ3M="
>>>>>>>>>>>>> },
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "v3.1.2-gs",
>>>>>>>>>>>>> "zipball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/zipball/refs/tags/v3.1.2-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "tarball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tarball/refs/tags/v3.1.2-gs
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "commit": {
>>>>>>>>>>>>> "sha": "b63324ef268def592ec48fc88b617cbc09bfcdd5",
>>>>>>>>>>>>> "url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/commits/b63324ef268def592ec48fc88b617cbc09bfcdd5
>>>>>>>>>>>>> "
>>>>>>>>>>>>> },
>>>>>>>>>>>>> "node_id": "MDM6UmVmODYzMzA2ODpyZWZzL3RhZ3MvdjMuMS4yLWdz"
>>>>>>>>>>>>> },
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "3.1.1.3-gs31",
>>>>>>>>>>>>> "zipball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/zipball/refs/tags/3.1.1.3-gs31
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "tarball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tarball/refs/tags/3.1.1.3-gs31
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "commit": {
>>>>>>>>>>>>> "sha": "da304b220e6cb5bcb7c333a8a37bb0446f81ab74",
>>>>>>>>>>>>> "url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/commits/da304b220e6cb5bcb7c333a8a37bb0446f81ab74
>>>>>>>>>>>>> "
>>>>>>>>>>>>> },
>>>>>>>>>>>>> "node_id":
>>>>>>>>>>>>> "MDM6UmVmODYzMzA2ODpyZWZzL3RhZ3MvMy4xLjEuMy1nczMx"
>>>>>>>>>>>>> },
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "3.1.1-gs31",
>>>>>>>>>>>>> "zipball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/zipball/refs/tags/3.1.1-gs31
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "tarball_url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tarball/refs/tags/3.1.1-gs31
>>>>>>>>>>>>> ",
>>>>>>>>>>>>> "commit": {
>>>>>>>>>>>>> "sha": "9c53917253e0512a8a3ffd569b6d20fea8c5179e",
>>>>>>>>>>>>> "url": "
>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/commits/9c53917253e0512a8a3ffd569b6d20fea8c5179e
>>>>>>>>>>>>> "
>>>>>>>>>>>>> },
>>>>>>>>>>>>> "node_id":
>>>>>>>>>>>>> "MDM6UmVmODYzMzA2ODpyZWZzL3RhZ3MvMy4xLjEtZ3MzMQ=="
>>>>>>>>>>>>> }
>>>>>>>>>>>>> ]
>>>>>>>>>>>>> -----END OF FILE-----
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> So, I tried to remove Seaside, I did the following:
>>>>>>>>>>>>>
>>>>>>>>>>>>> tode 1 > project unlock Seaside3
>>>>>>>>>>>>> [225346049 sz:10 TDMetacelloTool] aTDMetacelloTool
>>>>>>>>>>>>> tode 1 > project unregister Seaside3
>>>>>>>>>>>>> [226365953 sz:10 TDMetacelloTool] aTDMetacelloTool
>>>>>>>>>>>>> tode 1 > project delete Seaside3
>>>>>>>>>>>>> [208488449 sz:10 TDMetacelloTool] aTDMetacelloTool
>>>>>>>>>>>>> tode 1 > project unlock GsApplicationTools
>>>>>>>>>>>>> [208475649 sz:10 TDMetacelloTool] aTDMetacelloTool
>>>>>>>>>>>>> tode 1 > project unregister GsApplicationTools
>>>>>>>>>>>>> [208450305 sz:10 TDMetacelloTool] aTDMetacelloTool
>>>>>>>>>>>>> tode 1 > project delete GsApplicationTools
>>>>>>>>>>>>> [207945473 sz:10 TDMetacelloTool] aTDMetacelloTool
>>>>>>>>>>>>>
>>>>>>>>>>>>> And then reinstalled it:
>>>>>>>>>>>>>
>>>>>>>>>>>>> tode 1 > project install --url=
>>>>>>>>>>>>> https://gsdevkit.github.io/GsDevKit_home/Seaside32.ston
>>>>>>>>>>>>>
>>>>>>>>>>>>> 'cd $GS_HOME/shared/repos; git clone --no-checkout
>>>>>>>>>>>>> https://github.com/SeasideSt/Seaside.git'
>>>>>>>>>>>>> Clonando en 'Seaside'...
>>>>>>>>>>>>>
>>>>>>>>>>>>> 'cd $GS_HOME/shared/repos/Seaside; git --git-dir
>>>>>>>>>>>>> $GS_HOME/shared/repos/Seaside/.git --work-tree
>>>>>>>>>>>>> $GS_HOME/shared/repos/Seaside checkout master'
>>>>>>>>>>>>> Ya en 'master'
>>>>>>>>>>>>> Tu rama está actualizada con 'origin/master'.
>>>>>>>>>>>>>
>>>>>>>>>>>>> 'cd $GS_HOME/shared/repos/Seaside; git --git-dir
>>>>>>>>>>>>> $GS_HOME/shared/repos/Seaside/.git --work-tree
>>>>>>>>>>>>> $GS_HOME/shared/repos/Seaside symbolic-ref HEAD'
>>>>>>>>>>>>> refs/heads/master
>>>>>>>>>>>>>
>>>>>>>>>>>>> 'cd $GS_HOME/shared/repos; git clone --no-checkout
>>>>>>>>>>>>> https://github.com/GsDevKit/gsApplicationTools.git'
>>>>>>>>>>>>> Clonando en 'gsApplicationTools'...
>>>>>>>>>>>>>
>>>>>>>>>>>>> 'cd $GS_HOME/shared/repos/gsApplicationTools; git --git-dir
>>>>>>>>>>>>> $GS_HOME/shared/repos/gsApplicationTools/.git --work-tree
>>>>>>>>>>>>> $GS_HOME/shared/repos/gsApplicationTools checkout master'
>>>>>>>>>>>>> Ya en 'master'
>>>>>>>>>>>>> Tu rama está actualizada con 'origin/master'.
>>>>>>>>>>>>>
>>>>>>>>>>>>> 'cd $GS_HOME/shared/repos/gsApplicationTools; git --git-dir
>>>>>>>>>>>>> $GS_HOME/shared/repos/gsApplicationTools/.git --work-tree
>>>>>>>>>>>>> $GS_HOME/shared/repos/gsApplicationTools symbolic-ref HEAD'
>>>>>>>>>>>>> refs/heads/master
>>>>>>>>>>>>> [226664449 sz:18 TDProjectSpecEntryDefinition] ^
>>>>>>>>>>>>> TDProjectSpecEntryDefinition new
>>>>>>>>>>>>> baseline: 'Seaside3'
>>>>>>>>>>>>> repository:
>>>>>>>>>>>>> 'github://SeasideSt/Seaside:master/repository'
>>>>>>>>>>>>> loads: #(...
>>>>>>>>>>>>> tode 1 >
>>>>>>>>>>>>>
>>>>>>>>>>>>> And it seemed to work, now the project window reports:
>>>>>>>>>>>>>
>>>>>>>>>>>>> aTDMetacelloProjectBrowser
>>>>>>>>>>>>> --------------------
>>>>>>>>>>>>> |* Grease| eef515d [master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/Grease/repository
>>>>>>>>>>>>> + GsDevKit_home e3b4149 [master] $GS_HOME
>>>>>>>>>>>>> |Foo|
>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/Foo/repository
>>>>>>>>>>>>> |NeoJSON|
>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/NeoJSON/repository
>>>>>>>>>>>>> |FileTree| 28ab532 [gemstone2.4]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/filetree/repository
>>>>>>>>>>>>> |GLASS1| b3209f2d [master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/glass/repository
>>>>>>>>>>>>> Gofer 1.0.5.4 [release]
>>>>>>>>>>>>> http://seaside.gemtalksystems.com/ss/metacello
>>>>>>>>>>>>> |Metacello| e3963155 [master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/metacello-work/repository
>>>>>>>>>>>>> |RB| 00d0408 [dev]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/rb/repository
>>>>>>>>>>>>> |Ston| daadc02 [gemstone]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/ston/repository
>>>>>>>>>>>>> |Tode| 60a33e11c [master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/tode/repository
>>>>>>>>>>>>> |ZincHTTPComponents| 2c834394 [gs_master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/zinc/repository
>>>>>>>>>>>>> |Zodiac| 0cf6770 [gs_master]
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/zodiac/repository
>>>>>>>>>>>>> |GsApplicationTools|
>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/gsApplicationTools/repository
>>>>>>>>>>>>> |PharoCompatibility|
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/PharoCompatibility/repository
>>>>>>>>>>>>> |Seaside3|
>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/Seaside/repository
>>>>>>>>>>>>> |SmalltalkCI|
>>>>>>>>>>>>> filetree:///home/eze/dev/smalltalk/gemstone/GsDevKit_home/shared/repos/smalltalkCI/repository
>>>>>>>>>>>>>
>>>>>>>>>>>>> But then it fails when I try to load it:
>>>>>>>>>>>>>
>>>>>>>>>>>>> tode 1 > project load --loads=`#('Welcome' 'Development' 'Zinc
>>>>>>>>>>>>> Project' 'Examples')` Seaside3
>>>>>>>>>>>>>
>>>>>>>>>>>>> It fails compiling a method.
>>>>>>>>>>>>>
>>>>>>>>>>>>> This is the stacktrace:
>>>>>>>>>>>>>
>>>>>>>>>>>>> UserDefinedError: Compile error in Class: #'GRPlatformTest'
>>>>>>>>>>>>> method: testGreaseString
>>>>>>>>>>>>> self assert: 'Timberwolf' greaseString...
>>>>>>>>>>>>> --------------------
>>>>>>>>>>>>> 1. UserDefinedError(AbstractException)>>_signalWith: @5 line 25
>>>>>>>>>>>>> 2. UserDefinedError(AbstractException)>>signal @2 line 47
>>>>>>>>>>>>> 3. GRPlatformTest class(Object)>>error: @6 line 7
>>>>>>>>>>>>> 4. GRPlatformTest class(Behavior)>>compileMethod:category: @9
>>>>>>>>>>>>> line 16
>>>>>>>>>>>>> 5. MCPlatformSupport
>>>>>>>>>>>>> class>>compile:source:classified:withStamp: @4 line 5
>>>>>>>>>>>>> 6. MCMethodDefinition>>load @3 line 3
>>>>>>>>>>>>> 7. MCMethodDefinition(MCDefinition)>>loadOver: @2 line 2
>>>>>>>>>>>>> 8. [] in MCPackageLoader>>basicLoad @66 line 18
>>>>>>>>>>>>> 9. MessageNotUnderstood(AbstractException)>>_executeHandler:
>>>>>>>>>>>>> @7 line 11
>>>>>>>>>>>>> 10. MessageNotUnderstood(AbstractException)>>_signalWith: @1
>>>>>>>>>>>>> line 2
>>>>>>>>>>>>> 11. MessageNotUnderstood(AbstractException)>>signal @2 line 47
>>>>>>>>>>>>> 12. MCMethodDefinition(Object)>>doesNotUnderstand: @9 line 10
>>>>>>>>>>>>> 13.
>>>>>>>>>>>>> MCMethodDefinition(Object)>>_doesNotUnderstand:args:envId:reason: @8 line 14
>>>>>>>>>>>>> 14. [] in MCPackageLoader>>basicLoad @61 line 14
>>>>>>>>>>>>> 15. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>>>>>> 16. [] in UndefinedObject(MCPackageLoader)>>basicLoad @56 line
>>>>>>>>>>>>> 15
>>>>>>>>>>>>> 17. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>>>>>> 18. [] in UndefinedObject(MCPackageLoader)>>basicLoad @52 line
>>>>>>>>>>>>> 19
>>>>>>>>>>>>> 19. OrderedCollection(Collection)>>do: @5 line 10
>>>>>>>>>>>>> 20. OrderedCollection(Collection)>>do:displayingProgress: @2
>>>>>>>>>>>>> line 3
>>>>>>>>>>>>> 21. [] in MCPackageLoader>>basicLoad @24 line 13
>>>>>>>>>>>>> 22. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>>>>>> 23. [] in MCPackageLoader>>basicLoad @15 line 49
>>>>>>>>>>>>> 24. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>>>>>> 25. MCPackageLoader>>basicLoad @11 line 51
>>>>>>>>>>>>> 26. [] in MCPackageLoader>>loadWithNameLike: @12 line 4
>>>>>>>>>>>>> 27. [] in
>>>>>>>>>>>>> UndefinedObject(MCPackageLoader)>>useChangeSetNamed:during: @13 line 9
>>>>>>>>>>>>> 28. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>>>>>> 29. MCPackageLoader>>useChangeSetNamed:during: @9 line 9
>>>>>>>>>>>>> 30. MCPackageLoader>>useNewChangeSetNamedLike:during: @3 line 2
>>>>>>>>>>>>> 31. MCPackageLoader>>loadWithNameLike: @6 line 4
>>>>>>>>>>>>> 32. MCVersionLoader>>load @9 line 6
>>>>>>>>>>>>> 33. MetacelloGoferLoad(GoferLoad)>>execute @6 line 3
>>>>>>>>>>>>> 34. [] in
>>>>>>>>>>>>> UndefinedObject(MetacelloCommonMCSpecLoader)>>loadPackageDirective:gofer:
>>>>>>>>>>>>> @46 line 17
>>>>>>>>>>>>> 35. [] in
>>>>>>>>>>>>> MetacelloLoadingMCSpecLoader(MetacelloCommonMCSpecLoader)>>loadPackageDirective:gofer:
>>>>>>>>>>>>> @23 line 21
>>>>>>>>>>>>> 36.
>>>>>>>>>>>>> MetacelloGemStonePlatform(MetacelloPlatform)>>do:displaying: @2 line 3
>>>>>>>>>>>>> 37.
>>>>>>>>>>>>> MetacelloLoadingMCSpecLoader(MetacelloCommonMCSpecLoader)>>loadPackageDirective:gofer:
>>>>>>>>>>>>> @7 line 5
>>>>>>>>>>>>> 38.
>>>>>>>>>>>>> MetacelloLinearLoadDirective(MetacelloVersionLoadDirective)>>loadPackageDirective:gofer:
>>>>>>>>>>>>> @4 line 4
>>>>>>>>>>>>> 39. MetacelloPackageLoadDirective>>loadUsing:gofer: @2 line 3
>>>>>>>>>>>>> 40. [] in
>>>>>>>>>>>>> UndefinedObject(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>>>>>> @8 line 3
>>>>>>>>>>>>> 41. OrderedCollection(Collection)>>do: @5 line 10
>>>>>>>>>>>>> 42.
>>>>>>>>>>>>> MetacelloLinearLoadDirective(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>>>>>> @3 line 3
>>>>>>>>>>>>> 43. MetacelloLinearLoadDirective>>loadUsing:gofer: @6 line 4
>>>>>>>>>>>>> 44. [] in
>>>>>>>>>>>>> UndefinedObject(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>>>>>> @8 line 3
>>>>>>>>>>>>> 45. OrderedCollection(Collection)>>do: @5 line 10
>>>>>>>>>>>>> 46.
>>>>>>>>>>>>> MetacelloLinearLoadDirective(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>>>>>> @3 line 3
>>>>>>>>>>>>> 47. MetacelloLinearLoadDirective>>loadUsing:gofer: @6 line 4
>>>>>>>>>>>>> 48. [] in
>>>>>>>>>>>>> UndefinedObject(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>>>>>> @8 line 3
>>>>>>>>>>>>> 49. OrderedCollection(Collection)>>do: @5 line 10
>>>>>>>>>>>>> 50.
>>>>>>>>>>>>> MetacelloLinearLoadDirective(MetacelloVersionLoadDirective)>>loadLinearLoadDirective:gofer:
>>>>>>>>>>>>> @3 line 3
>>>>>>>>>>>>> 51. MetacelloLinearLoadDirective>>loadUsing:gofer: @6 line 4
>>>>>>>>>>>>> 52.
>>>>>>>>>>>>> MetacelloLinearLoadDirective(MetacelloVersionLoadDirective)>>loadWithPolicy:
>>>>>>>>>>>>> @7 line 7
>>>>>>>>>>>>> 53. MetacelloLoaderPolicy>>load @6 line 4
>>>>>>>>>>>>> 54. MetacelloFetchingMCSpecLoader>>doLoad @4 line 3
>>>>>>>>>>>>> 55. [] in
>>>>>>>>>>>>> UndefinedObject(MetacelloMCVersion)>>doLoadRequiredFromArray: @40 line 12
>>>>>>>>>>>>> 56.
>>>>>>>>>>>>> MetacelloGemStonePlatform(MetacelloPlatform)>>do:displaying: @2 line 3
>>>>>>>>>>>>> 57. [] in MetacelloMCVersion>>doLoadRequiredFromArray: @31
>>>>>>>>>>>>> line 12
>>>>>>>>>>>>> 58. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>>>>>> 59. MetacelloMCVersion>>doLoadRequiredFromArray: @22 line 16
>>>>>>>>>>>>> 60. Array(Collection)>>loadRequiredForMetacelloMCVersion: @2
>>>>>>>>>>>>> line 3
>>>>>>>>>>>>> 61. MetacelloMCVersion>>load: @2 line 3
>>>>>>>>>>>>> 62. [] in
>>>>>>>>>>>>> MetacelloScriptEngine>>load:onProjectDownGrade:onProjectUpgrade: @18 line 16
>>>>>>>>>>>>> 63. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>>>>>> 64. [] in MetacelloScriptEngine>>handleNotificationsForAction:
>>>>>>>>>>>>> @20 line 6
>>>>>>>>>>>>> 65. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>>>>>> 66. [] in MetacelloScriptEngine>>handleNotificationsForAction:
>>>>>>>>>>>>> @12 line 14
>>>>>>>>>>>>> 67. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>>>>>> 68. [] in MetacelloScriptEngine>>handleNotificationsForAction:
>>>>>>>>>>>>> @6 line 20
>>>>>>>>>>>>> 69. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>>>>>> 70. MetacelloScriptEngine>>handleNotificationsForAction: @2
>>>>>>>>>>>>> line 24
>>>>>>>>>>>>> 71. [] in
>>>>>>>>>>>>> MetacelloScriptEngine>>load:onProjectDownGrade:onProjectUpgrade: @6 line 5
>>>>>>>>>>>>> 72. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>>>>>> 73. MetacelloProjectRegistration
>>>>>>>>>>>>> class>>copyRegistryRestoreOnErrorWhile: @8 line 14
>>>>>>>>>>>>> 74.
>>>>>>>>>>>>> MetacelloScriptEngine>>load:onProjectDownGrade:onProjectUpgrade: @2 line 3
>>>>>>>>>>>>> 75. MetacelloScriptEngine>>load: @2 line 3
>>>>>>>>>>>>> 76. MetacelloScriptEngine(Object)>>perform:withArguments: @1
>>>>>>>>>>>>> line 12
>>>>>>>>>>>>> 77. [] in
>>>>>>>>>>>>> MetacelloScriptApiExecutor(MetacelloScriptExecutor)>>execute: @40 line 15
>>>>>>>>>>>>> 78. [] in MetacelloScriptApiExecutor>>executeString:do: @13
>>>>>>>>>>>>> line 6
>>>>>>>>>>>>> 79. Array(Collection)>>do: @5 line 10
>>>>>>>>>>>>> 80. MetacelloScriptApiExecutor>>executeString:do: @6 line 4
>>>>>>>>>>>>> 81. String>>execute:against: @2 line 2
>>>>>>>>>>>>> 82.
>>>>>>>>>>>>> MetacelloScriptApiExecutor(MetacelloScriptExecutor)>>execute: @6 line 9
>>>>>>>>>>>>> 83. Metacello>>execute:args: @8 line 5
>>>>>>>>>>>>> 84. Metacello>>load: @2 line 2
>>>>>>>>>>>>> 85. [] in TDMetacelloTool>>basicProjectLoadFromSpec: @102 line
>>>>>>>>>>>>> 47
>>>>>>>>>>>>> 86. [] in GsDeployer>>deploy: @21 line 8
>>>>>>>>>>>>> 87. ExecBlock0(ExecBlock)>>on:do: @3 line 44
>>>>>>>>>>>>> 88. [] in GsDeployer>>deploy: @7 line 9
>>>>>>>>>>>>> 89. [] in MCPlatformSupport
>>>>>>>>>>>>> class>>commitOnAlmostOutOfMemoryDuring: @11 line 7
>>>>>>>>>>>>> 90. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>>>>>> 91. MCPlatformSupport class>>commitOnAlmostOutOfMemoryDuring:
>>>>>>>>>>>>> @6 line 8
>>>>>>>>>>>>> 92. [] in UndefinedObject(GsDeployer)>>mcPlatformSupportDo:
>>>>>>>>>>>>> @13 line 11
>>>>>>>>>>>>> 93. ExecBlock0(ExecBlock)>>ensure: @2 line 12
>>>>>>>>>>>>> 94. GsDeployer>>mcPlatformSupportDo: @9 line 12
>>>>>>>>>>>>> 95. GsDeployer>>deploy: @2 line 3
>>>>>>>>>>>>> 96. GsDeployer class>>bulkMigrate: @5 line 15
>>>>>>>>>>>>> 97. TDMetacelloTool>>basicProjectLoadFromSpec: @62 line 61
>>>>>>>>>>>>> 98.
>>>>>>>>>>>>> TDProjectSpecEntryDefinition>>projectLoadFromSpec:using:registration: @8
>>>>>>>>>>>>> line 5
>>>>>>>>>>>>> 99.
>>>>>>>>>>>>> TDMetacelloUnloadedProjectRegistrationDefinition(TDMetacelloProjectRegistrationDefinition)>>projectLoadFromSpec:using:
>>>>>>>>>>>>> @3 line 3
>>>>>>>>>>>>> 100. TDMetacelloTool>>projectLoadFromSpec:registration: @2
>>>>>>>>>>>>> line 2
>>>>>>>>>>>>> 101. [] in TDMetacelloTool>>projectload @247 line 151
>>>>>>>>>>>>> 102. Dictionary(AbstractDictionary)>>at:ifPresent:ifAbsent: @3
>>>>>>>>>>>>> line 5
>>>>>>>>>>>>> 103. TDMetacelloTool>>projectload @62 line 148
>>>>>>>>>>>>> 104. TDMetacelloTool(Object)>>perform: @1 line 8
>>>>>>>>>>>>> 105. TDMetacelloTool class(TDAbstractDevTool
>>>>>>>>>>>>> class)>>performSubCommand:objIn:commandOptions:todeCommand: @26 line 23
>>>>>>>>>>>>> 106. [] in TDMetacelloTool class>>project @5 line 5
>>>>>>>>>>>>> 107. ExecBlock4(ExecBlock)>>cull:cull:cull:cull: @20 line 14
>>>>>>>>>>>>> 108. TDTopezServer>>evaluateCommand:objIn: @18 line 22
>>>>>>>>>>>>> 109. TDTopezServer>>evaluateSTONCommand: @9 line 6
>>>>>>>>>>>>> 110. Executed Code
>>>>>>>>>>>>> 111. GsNMethod class>>_gsReturnToC @1 line 11
>>>>>>>>>>>>>
>>>>>>>>>>>>> This is the method that it tried to compile:
>>>>>>>>>>>>>
>>>>>>>>>>>>> testGreaseString
>>>>>>>>>>>>> self assert: 'Timberwolf' greaseString = 'Timberwolf'.
>>>>>>>>>>>>> self assert: #DireWolf greaseString = 'DireWolf'.
>>>>>>>>>>>>> self deny: #DireWolf greaseString isSymbol.
>>>>>>>>>>>>> self assert: true greaseString = 'true'.
>>>>>>>>>>>>> self assert: 666 greaseString = '666'.
>>>>>>>>>>>>> "make sure we're not immediate"
>>>>>>>>>>>>> self assert: ((2 raisedTo: 64) + 1) greaseString =
>>>>>>>>>>>>> '18446744073709551617'.
>>>>>>>>>>>>> "make sure we're not immediate"
>>>>>>>>>>>>> self assert: ((2 raisedTo: 64) + 1) negated greaseString =
>>>>>>>>>>>>> '-18446744073709551617'.
>>>>>>>>>>>>> self assert: $A greaseString = 'A'.
>>>>>>>>>>>>> self assert: nil greaseString = 'nil'.
>>>>>>>>>>>>> [ "Smalltalk/X has constant folding so 1 / 0 will be evaluated
>>>>>>>>>>>>> at compile time
>>>>>>>>>>>>> resulting in an error when loading the code."
>>>>>>>>>>>>> 1 perform: #/ with: 0 ]
>>>>>>>>>>>>> on: ZeroDivide
>>>>>>>>>>>>> do: [ :error | self assert: error greaseString isString ].
>>>>>>>>>>>>> self assert: 15.25 greaseString = '15.25'.
>>>>>>>>>>>>> self assert: nil greaseString isString.
>>>>>>>>>>>>> self assert: (4 @ 2) greaseString = '4 at 2'.
>>>>>>>>>>>>> "#greaseString for a byte array should not do any decoding
>>>>>>>>>>>>> this is in place to catch encoding errors early"
>>>>>>>>>>>>> self assert: #(101 97 ) asByteArray greaseString ~= 'ea'.
>>>>>>>>>>>>> self assert: #(101 97 ) asByteArray greaseString isString.
>>>>>>>>>>>>> self assert: Object new greaseString isString.
>>>>>>>>>>>>> "Printing scaled decimals (
>>>>>>>>>>>>> https://github.com/SeasideSt/Grease/issues/1)"
>>>>>>>>>>>>> self assert: 1.21s3 greaseString = '1.210'.
>>>>>>>>>>>>> self assert: -1.21s3 greaseString = '-1.210'
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> I don't see any syntax errors there.
>>>>>>>>>>>>>
>>>>>>>>>>>>> So, I'm not sure what's going on. Now I have to leave, but
>>>>>>>>>>>>> I'll try to delete everything and start again from scratch when I come back.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thank you very much for your help!
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Ezequiel R. Aguerre
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> El vie, 7 ene 2022 a la(s) 15:40, Dale Henrichs via Glass (
>>>>>>>>>>>>> glass at lists.gemtalksystems.com) escribió:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Ezequiel,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> When you get a tODE debugger window on an error:
>>>>>>>>>>>>>> [image: image.png]
>>>>>>>>>>>>>> you can use the `step *` menu items (and keyboard shortcuts)
>>>>>>>>>>>>>> to control stepping ... for reporting errors the `Window>>print window`
>>>>>>>>>>>>>> produces a test window that contains all of the frames in a form that you
>>>>>>>>>>>>>> can copy from (print window is available for every tODE window).
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> So providing us with a print of the stack window will help us
>>>>>>>>>>>>>> understand the error you are getting in more detail ... providing a print
>>>>>>>>>>>>>> window of the `project list` will give us information about all of the
>>>>>>>>>>>>>> projects you have loaded and more importantly the version/SHA/branch that
>>>>>>>>>>>>>> you are using for each of those projects. Here's the "print window" from
>>>>>>>>>>>>>> `project list` in my image:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --------------------
>>>>>>>>>>>>>>> + FileSystemGemStone
>>>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/FileSystem-GemStone/repository
>>>>>>>>>>>>>>> |GsSqueak|
>>>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/BP2017RH1/dhenrich/tODEIntegration/src
>>>>>>>>>>>>>>> |RemoteServiceReplication|
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/RemoteServiceReplication/filetree
>>>>>>>>>>>>>>> |FileTree| 28ab532 [gemstone2.4]
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/filetree/repository
>>>>>>>>>>>>>>> |GLASS1| d78deea2 ^ b3209f2d [master]
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/glass/repository
>>>>>>>>>>>>>>> GsDevKit_home 82c7842 [master]
>>>>>>>>>>>>>>> $GS_HOME
>>>>>>>>>>>>>>> |Tonel|
>>>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/tonel/src
>>>>>>>>>>>>>>> Gofer 1.0.5.4 [release]
>>>>>>>>>>>>>>> http://seaside.gemtalksystems.com/ss/metacello
>>>>>>>>>>>>>>> |Grease| 3466bfa ^ eef515d [master]
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/Grease/repository
>>>>>>>>>>>>>>> |Metacello| 0128f801 [master]
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/metacello-work/repository
>>>>>>>>>>>>>>> |RB| 6790c6e [dev]
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/rb/repository
>>>>>>>>>>>>>>> |Ston| eb35c53 [gemstone]
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/ston/repository
>>>>>>>>>>>>>>> |ZincHTTPComponents| eddbfb0 ^ 2c834394 [gs_master]
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/zinc/repository
>>>>>>>>>>>>>>> |Tode| 5957d0464 [master]
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/tode/repository
>>>>>>>>>>>>>>> |Zodiac| 58b1125 [gs_master]
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/zodiac/repository
>>>>>>>>>>>>>>> BitmapCharacterSet
>>>>>>>>>>>>>>> github://GsDevKit/BitmapCharacterSet:gemstone/filetree
>>>>>>>>>>>>>>> |GsApplicationTools|
>>>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/gsApplicationTools/repository
>>>>>>>>>>>>>>> |Obex|
>>>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/obex/repository
>>>>>>>>>>>>>>> OrderPreservingDictionary
>>>>>>>>>>>>>>> github://GsDevKit/OrderPreservingDictionary:gemstone/filetree
>>>>>>>>>>>>>>> |Parasol|
>>>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/Parasol/repository
>>>>>>>>>>>>>>> |PharoCompatibility|
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/PharoCompatibility/repository
>>>>>>>>>>>>>>> |Seaside3|
>>>>>>>>>>>>>>> filetree://$GS_HOME/shared/repos/Seaside/repository
>>>>>>>>>>>>>>> SIXX
>>>>>>>>>>>>>>> github://glassdb/SIXX:master/repository
>>>>>>>>>>>>>>> |SmalltalkCI|
>>>>>>>>>>>>>>> filetree:///home/dhenrich/rogue/_homes/rogue/_home/shared/repos/smalltalkCI/repository
>>>>>>>>>>>>>>> XMLParser
>>>>>>>>>>>>>>> github://GsDevKit/XML-XMLParser:gemstone/filetree
>>>>>>>>>>>>>>> XMLWriter
>>>>>>>>>>>>>>> github://GsDevKit/XML-XMLWriter:gemstone/filetree
>>>>>>>>>>>>>>> XPath
>>>>>>>>>>>>>>> github://GsDevKit/XML-XPath:gemstone/filetree
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> using "print window" is preferable to a screen shot, because
>>>>>>>>>>>>>> we can use copy and paste to extract information from the window (and it's
>>>>>>>>>>>>>> easier for you to extract information from the system and paste it into bug
>>>>>>>>>>>>>> reports as well)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Dale
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Fri, Jan 7, 2022 at 7:16 AM Johan Brichau via Glass <
>>>>>>>>>>>>>> glass at lists.gemtalksystems.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Ezequiel,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I am using the same instructions for loading the current
>>>>>>>>>>>>>>> Seaside master in a GsDevkit stone, so let’s see what is happening in your
>>>>>>>>>>>>>>> case…
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Which version of GemStone are you using?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> From the variables you are quoting, it seems that you are
>>>>>>>>>>>>>>> trying to load the (old) Seaside31 project.
>>>>>>>>>>>>>>> That should not be happening of the project was defined
>>>>>>>>>>>>>>> correctly. So, the root cause is probably because the first step is failing.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Can you give more info on what is ‘failing’ when you type:
>>>>>>>>>>>>>>> project install --url=
>>>>>>>>>>>>>>> http://gsdevkit.github.io/GsDevKit_home/Seaside32.ston
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Cheers,
>>>>>>>>>>>>>>> Johan
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On 7 Jan 2022, at 01:59, Ezequiel R. Aguerre via Glass <
>>>>>>>>>>>>>>> glass at lists.gemtalksystems.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi everyone! I'm experimenting a little bit with GemStone. I
>>>>>>>>>>>>>>> tried to install Seaside but the instructions are not working for me.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I've used the scripts of the GsDevKit_home to setup
>>>>>>>>>>>>>>> everything, I can launch tODE successfully, but when I type the following
>>>>>>>>>>>>>>> commands in the shell, they don't work.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The first one:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> project install --url=
>>>>>>>>>>>>>>> http://gsdevkit.github.io/GsDevKit_home/Seaside32.ston
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> This one fails, but it also says something about Seaside
>>>>>>>>>>>>>>> being already installed... so I just skip it.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> But then, this command fails:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> project load --loads=`#('Welcome' 'Development' 'Zinc
>>>>>>>>>>>>>>> Project' 'Examples')` Seaside3
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> It raises an exception about accessing an array with a
>>>>>>>>>>>>>>> non-integer index.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> It looks like there must be something outdated, but I'm not
>>>>>>>>>>>>>>> sure. So I can't load Seaside to start playing with it.
>>>>>>>>>>>>>>> If I right-click "load" on the project list, it happens the
>>>>>>>>>>>>>>> same thing.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The following is an investigation on the issue in case it
>>>>>>>>>>>>>>> clarifies anything:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The error is raised in the following method:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> MetacelloGemStonePlatform>>downloadJSON: url eTagsCache:
>>>>>>>>>>>>>>> eTagsCache eTagsKey: eTagsKey username: username pass: pass
>>>>>>>>>>>>>>> "(code ...)"
>>>>>>>>>>>>>>> (status beginsWith: '403')
>>>>>>>>>>>>>>> ifTrue: [
>>>>>>>>>>>>>>> | jsonObject |
>>>>>>>>>>>>>>> "Oh snap! Rate limit exceeded"
>>>>>>>>>>>>>>> jsonObject := MCFileTreeJsonParser parse:
>>>>>>>>>>>>>>> payload.
>>>>>>>>>>>>>>> self error: (jsonObject at: 'message') ].
>>>>>>>>>>>>>>> "(more code...)"
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> jsonObject is actually an array, so jsonObject at: 'message'
>>>>>>>>>>>>>>> raises an excepction.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> These are the values of the variables:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> - url: '
>>>>>>>>>>>>>>> https://api.github.com/repos/GsDevKit/Seaside31/tags'
>>>>>>>>>>>>>>> - username: nil
>>>>>>>>>>>>>>> - pass: nil
>>>>>>>>>>>>>>> - eTagsKey: 'GsDevKit/Seaside31'
>>>>>>>>>>>>>>> - eTagsCache: aDictionary( 'GsDevKit/Seaside31' ->
>>>>>>>>>>>>>>> aDictionary() )
>>>>>>>>>>>>>>> - jsonObject: an array of dictionaries, each dictionary has
>>>>>>>>>>>>>>> the following information:
>>>>>>>>>>>>>>> - commit: a dictionary with a "sha" and "url" keys
>>>>>>>>>>>>>>> - name: a string like 'v3.1.4.2-gs'
>>>>>>>>>>>>>>> - node_id: a base64 encoded string, when decoded is
>>>>>>>>>>>>>>> something like: '03:Ref8633068:refs/tags/v3.1.4.2-gs'
>>>>>>>>>>>>>>> - tarball_url: a url
>>>>>>>>>>>>>>> - zipball_url: a url
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I don't know how to use the debugger yet, so I can't step
>>>>>>>>>>>>>>> through the code. But I think the problem is actually up above, in the
>>>>>>>>>>>>>>> following line:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> status := headerDict at: 'status' ifAbsent: [ '403' ].
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Because the server is actually responding correctly, if I
>>>>>>>>>>>>>>> "curl https://api.github.com/repos/GsDevKit/Seaside31/tags"
>>>>>>>>>>>>>>> it works just fine.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> And the following method:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> MetacelloGemStonePlatform>>extractHTTPHeader: aStream do:
>>>>>>>>>>>>>>> aBlock
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> explicitly skips the first HTTP line (the status):
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> line := aStream nextLine. "strip status"
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I tried adding a line like the following:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> header at: 'status' put: (line substrings at: 2).
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> But then I have a problem with an "X-Ratelimit-Remaining"
>>>>>>>>>>>>>>> header.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> So I'm not sure... I think there's something outdated
>>>>>>>>>>>>>>> somewhere... I don't know how to proceed.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Or maybe this kind of things are better asked on the Github
>>>>>>>>>>>>>>> issue tracker? I don't know, I didn't want to open an issue that may not be
>>>>>>>>>>>>>>> an issue at all.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Oh, before I forget, I'm running Arch Linux 64 bits, maybe
>>>>>>>>>>>>>>> the problem is my environment.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks!
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Ezequiel R. Aguerre
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> Glass mailing list
>>>>>>>>>>>>>>> Glass at lists.gemtalksystems.com
>>>>>>>>>>>>>>> https://lists.gemtalksystems.com/mailman/listinfo/glass
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> Glass mailing list
>>>>>>>>>>>>>>> Glass at lists.gemtalksystems.com
>>>>>>>>>>>>>>> https://lists.gemtalksystems.com/mailman/listinfo/glass
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> Glass mailing list
>>>>>>>>>>>>>> Glass at lists.gemtalksystems.com
>>>>>>>>>>>>>> https://lists.gemtalksystems.com/mailman/listinfo/glass
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.gemtalksystems.com/mailman/archives/glass/attachments/20220113/ad77d17b/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 120038 bytes
Desc: not available
URL: <http://lists.gemtalksystems.com/mailman/archives/glass/attachments/20220113/ad77d17b/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 62268 bytes
Desc: not available
URL: <http://lists.gemtalksystems.com/mailman/archives/glass/attachments/20220113/ad77d17b/attachment-0005.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 10413 bytes
Desc: not available
URL: <http://lists.gemtalksystems.com/mailman/archives/glass/attachments/20220113/ad77d17b/attachment-0006.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 17040 bytes
Desc: not available
URL: <http://lists.gemtalksystems.com/mailman/archives/glass/attachments/20220113/ad77d17b/attachment-0007.png>
More information about the Glass
mailing list