[Glass] Seaside 3.1.1 in GemStone 3.1.0.5?

Sun Feb 16 11:01:25 PST 2014

Gerhard,

It seems there is a problem loading packages from the github repository.
Can you check in your /tmp if there are github zipfiles?

Johan

On 15 Feb 2014, at 18:48, Gerhard Obermann <obi068 at gmail.com> wrote:

> Hi!
> 
> I tried to load seaside 3.1 following the instructions on github.com/glassdb/Seaside31 into a clean 3.1.0.5 db.
> 
> Only the first script did work.
> 
> After that i always get the following errors:
> 
> ...RETRY->BaselineOfGLASS1
> ...RETRY->BaselineOfGLASS1
> gofer repository error: 'GoferRepositoryError: file is too short'...ignoring
> ...FAILED->BaselineOfGLASS1
> 
> without loading GLASS
> 
> Fetched -> ConfigurationOfGrease-JohanBrichau.250 --- http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main --- http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main
> Loaded -> ConfigurationOfGrease-JohanBrichau.250 --- http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main --- http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main
> ...RETRY->BaselineOfSeaside3
> ...RETRY->BaselineOfSeaside3
> gofer repository error: 'GoferRepositoryError: file is too short'...ignoring
> ...FAILED->BaselineOfSeaside3
> 
> 
> Am i missing something.
> 
> Gerhard
> 
> 
> 
> 
> On Sat, Feb 15, 2014 at 1:14 PM, Johan Brichau <johan at yesplan.be> wrote:
> Hi Paul,
> 
> The second error is because the ConfigurationOfSeaside3 does not pull in the latest Grease 1.1.
> The loading script in the README on the github repo has an explicit step for that. 
>  
> I’m busy setting up the Grease port for Gemstone on the glassdb github repository and hope to finish that sometime this weekend.
> 
> The first loading error is strange because REST explicitly sets the Core as a prerequisite.
> I have updated the configuration baseline and maybe the online version was a bit behind. So it might be fixed now.
> 
> Johan
> 
> On 14 Feb 2014, at 23:55, Paul DeBruicker <pdebruic at gmail.com> wrote:
> 
>> Hey Johan,
>> 
>> I expect you're already planning to take a look at these but if not I
>> noticed a couple other things.  I've reverted back to 3.0.10 because I was
>> getting an error when loading 'REST' into gemStone 3.1.0.5.  When loading
>> Seaside-REST-Core-JohanBrichau.53 package it complained about needing: 
>>  WARequestHandler
>>  WARequestFilter
>>  WAError
>>  WAObject
>>  WASystemConfiguration
>> 
>> So it seems like Seaside-Core.gemstone wasn't loaded. 
>> 
>> 
>> When loading the 'JQuery' group it stumbled on this package:
>> Seaside-JSON-Core-DiegoLont.25 and emitted this error:
>> 
>> a Halt occurred (error 2709), Debug Warning: Warning: This package depends
>> on the following classes:
>>  GRDelegatingStream
>> You must resolve these dependencies before you will be able to load these
>> definitions: 
>>  GRDelegatingStream>>json:
>> 
>> 
>> 
>> 
>> I was loading the packages like this:
>> 
>>  Metacello new
>>    baseline: 'Seaside3';
>>    repository: 'github://glassdb/Seaside31:gemstone3.1/repository';
>>    load: 'REST'
>> 
>> 
>> 
>> But the errors also occurred when using my projects configuration.
>> 
>> 
>> Thanks for taking a look
>> 
>> 
>> Paul
>> 
>> 
>> 
>> Johan Brichau-3 wrote
>>> Hey Paul,
>>> 
>>> Opening up the ConfigurationOfSeaside3, I think I spotted the problem.
>>> Can you load my latest commit and try again?
>>> 
>>> If it's not working, I will have to dig a bit deeper.
>>> 
>>> Johan
>>> 
>>> On 14 Feb 2014, at 21:11, Paul DeBruicker <
>> 
>>> pdebruic@
>> 
>>> > wrote:
>>> 
>>>> Hi Johan,
>>>> 
>>>> Thanks for the info.  
>>>> 
>>>> Is there a way to use 3.1.x on GemStone without having to remove the
>>>> Seaside
>>>> loading instructions on GemStone from all of the Configurations a project
>>>> may depend upon?
>>>> 
>>>> 
>>>> If I load Seaside using the github instructions then load my
>>>> configuration I
>>>> get a conflict error between the Seaside baseline and configuration.
>>>> 
>>>> 
>>>> 
>>>> Thanks again
>>>> 
>>>> Paul
>>>> 
>>>> 
>>>> 
>>>> 
>>>> Johan Brichau-3 wrote
>>>>> Hi Paul,
>>>>> 
>>>>> In Gemstone, the Seaside-Core package is not loaded. Instead, the
>>>>> Gemstone
>>>>> port Seaside-Core.gemstone is loaded.
>>>>> I added the 3.1.1 version as the #development version but it was not
>>>>> (yet)
>>>>> intended for Gemstone actually.
>>>>> 
>>>>> Loading Seaside 3.1 for gemstone now only works using the load
>>>>> instructions on github. 
>>>>> I'm close to wrapping up the ConfigurationOfSeaside3 though. I will take
>>>>> a
>>>>> look over the weekend.
>>>>> 
>>>>> Johan
>>>>> 
>>>>> On 14 Feb 2014, at 20:45, Paul DeBruicker <
>>>> 
>>>>> pdebruic@
>>>> 
>>>>> > wrote:
>>>>> 
>>>>>> Hello,
>>>>>> 
>>>>>> Inside my project’s configuration I’m attempting to load Seaside 3.1.1
>>>>>> into GemStone 3.1.05 and it fails with this error: 
>>>>>> 
>>>>>> 
>>>>>> ...RETRY->Seaside-Core-pmm.809
>>>>>> ...RETRY->Seaside-Core-pmm.809
>>>>>> ...FAILED->Seaside-Core-pmm.809
>>>>>> 
>>>>>> 
>>>>>> in the github-cache the metacello version info shows that the ‘version’
>>>>>> of Seaside-Core to be pmm.809 so I’m not sure why it can’t find it. 
>>>>>> I’ve
>>>>>> attached the transcript output from the load.  
>>>>>> 
>>>>>> 
>>>>>> In my configuration I haven’t updated or changed the spec references
>>>>>> for
>>>>>> Seaside in GemStone. They still point to the ConfigurationOfSeaside3 on
>>>>>> smalltalkhub.   I only changed the version from ‘3.0.10’ to ‘3.1.1’. 
>>>>>> Should I change it to point to the BaselineOfSeaside3?  If so what is
>>>>>> the
>>>>>> right way to make that change?  What else should I look at?  
>>>>>> 
>>>>>> 
>>>>>> Things load fine if I follow the instructions on
>>>>>> github.com/glassdb/Seaside31 but not if Seaside only a part of the
>>>>>> project I’m loading.  
>>>>>> 
>>>>>> 
>>>>>> Thanks
>>>>>> 
>>>>>> Paul
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>> 
>>> <seaside31-on-gemstone-3105.rtf>
>>>>> _______________________________________________
>>>>>> Glass mailing list
>>>>>> 
>>>> 
>>>>> Glass at .gemtalksystems
>>>> 
>>>>>> http://lists.gemtalksystems.com/mailman/listinfo/glass
>>>>> 
>>>>> _______________________________________________
>>>>> Glass mailing list
>>>> 
>>>>> Glass at .gemtalksystems
>>>> 
>>>>> http://lists.gemtalksystems.com/mailman/listinfo/glass
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> --
>>>> View this message in context:
>>>> http://forum.world.st/Glass-Seaside-3-1-1-in-GemStone-3-1-0-5-tp4743869p4743873.html
>>>> Sent from the GLASS mailing list archive at Nabble.com.
>>>> _______________________________________________
>>>> Glass mailing list
>>>> 
>> 
>>> Glass at .gemtalksystems
>> 
>>>> http://lists.gemtalksystems.com/mailman/listinfo/glass
>>> 
>>> _______________________________________________
>>> Glass mailing list
>> 
>>> Glass at .gemtalksystems
>> 
>>> http://lists.gemtalksystems.com/mailman/listinfo/glass
>> 
>> 
>> 
>> 
>> 
>> --
>> View this message in context: http://forum.world.st/Glass-Seaside-3-1-1-in-GemStone-3-1-0-5-tp4743869p4743897.html
>> Sent from the GLASS mailing list archive at Nabble.com.
>> _______________________________________________
>> Glass mailing list
>> Glass at lists.gemtalksystems.com
>> http://lists.gemtalksystems.com/mailman/listinfo/glass
> 
> 
> _______________________________________________
> Glass mailing list
> Glass at lists.gemtalksystems.com
> http://lists.gemtalksystems.com/mailman/listinfo/glass
> 
> 